Before holding a client deposit in trust, check its classification, signed terms, receiving account, client records, and rules for applying or returning funds.
Key takeaways
- Classify the payment and record the reason.
- Get signed terms covering the purpose, approved draws, and refunds.
- Confirm the client account and transfer authority before accepting money.
- Track each client's balance and reconcile it with the bank statement.
- Document when funds can be applied and how unused money returns to the client.
A tax client might pay a retainer ahead of a year-end engagement. A bookkeeping client might send a deposit to reserve time on the calendar. A business owner might hand over funds for a valuation that has not begun. Each payment raises the same question for the partner and the operations lead: where should this money sit until the firm earns it or returns it?
The two roles split the work naturally. The partner owns the judgment calls: how a payment is classified, what the engagement letter promises, and whether a deposit is accepted at all. The operations lead owns the mechanics: the account, the transaction records, the statements, and the reconciliation. Each check below names a decision and the routine that supports it, so both roles know their part before the money arrives.
Client money is different from a bill for work already done. If the firm mixes the two, it can lose track of whose money is whose. It can also end up paying its own expenses with a client's funds, even by accident. A trust account is one way to keep client money separate from the firm's own money.
Whether your firm must use a trust account, and how it must run one, depends on the rules that apply to your profession and your state. Those rules vary. The Texas Access to Justice Foundation notes that all 50 states and the District of Columbia have approved IOLTA programs. Check separately which requirements apply to your accounting firm. This post does not give legal or accounting advice, and it does not describe what those rules say for your firm. It offers five checks you can run each time a deposit comes in. Use them to start the conversation with your compliance contact, your outside advisors, or your state's licensing body.
Check 1: decide whether the money is client property or an earned fee
Decide this before you accept any payment: is the money held for a future purpose, or has the firm already earned it?
This is the question that needs the closest look. A retainer paid to reserve future time is not the same as an invoice paid after a return is finished. The first is money the client has advanced for work not yet performed. The second is a fee the firm has earned. The label on the invoice or the name the client gave the payment does not settle the question by itself. Look at what the payment is for and when the firm will have done the work that justifies keeping it.
Write down the reason for your decision in the client file. A short note is enough, such as "advance for the year-end bookkeeping engagement, applied monthly against approved invoices." If the firm cannot say when the money becomes earned, do not treat it as earned. Ask whoever handles compliance, or a lawyer who advises the firm, to confirm how the rules in your state treat advance payments of this kind. For the related income decision, see client retainer rules.
Keep the decision consistent. If the firm treats one retainer as client money and a similar retainer as earned income, the records should show a clear reason for the difference. Inconsistent treatment is hard to explain later, to a client, a bank, or a regulator.
Consider a firm that receives a fee in October from a payroll client for services to be delivered over the following months. The partner reads the engagement letter, sees that the money covers work not yet performed, and decides it stays in trust until the work is billed. The operations lead notes the decision in the client file. If a question about the timing of a bill comes up later, the note shows what the firm decided and why.
Check 2: put the purpose and terms in a signed engagement letter
The engagement letter should state what the deposit is for, how the firm will apply it, and when any unused amount goes back to the client.
Start with the basics. Name the client, the services covered, and the amount received. Describe the purpose in plain words that match the scope of work. Then describe how the money will be used. For example, the letter might say that the firm will bill approved work against the deposit each month and send the client a statement of the balance. Those words should match what the firm will actually do, because the letter is the document the client will read first if there is a disagreement.
Cover the unhappy cases too. What happens if the client cancels early? What happens if the firm ends the engagement? Who decides when a dispute over an invoice is resolved, and how does the client raise a question? These answers are easy to write now and hard to settle after a problem appears.
Picture a client who pays a deposit for a tax planning project and then asks, a few weeks in, why only part of it has been applied. If the letter describes a draw against approved invoices, the operations lead can point to that language and to the statements already sent. If the letter says only "deposit for services," the firm has to explain a practice nobody wrote down.
Have the client sign the letter, and give the client a copy. Keep the signed version with the transaction records for that client. The operations lead should be able to pull the letter and the account history together in one place without having to ask anyone where a document is.
Check 3: hold the funds in an account set up for client money
Client funds should sit in an account that is set up and labeled as a trust or client account, not in the firm's operating account.
When you open or review the account, confirm the account title with the bank. The title should show that the account holds client funds. Ask the bank in writing how the account handles interest, and check what the engagement letter says about interest for that deposit. Do not assume that interest belongs to the firm just because the account is at the firm's bank. Some rules go further for other professions. For example, the IOLA program states that a New York lawyer may not place qualifying funds in a non-interest bearing account. That rule applies to lawyers, so ask your advisors whether any comparable requirement applies to your firm.
Limit who can move money out of the account. Name the people with signing or transfer authority and write the list down. Review it when someone joins or leaves the firm. Shared logins and informal access make it difficult to show later who approved a payment.
Keep the firm's own money out of the account. If the firm deposits its fees into the trust account by mistake, or pays a vendor from it, correct the error promptly and record the correction. A trust account that carries the firm's own funds can make it hard to show what belongs to each client.
Suppose a firm pays a software subscription from the trust account by mistake during a busy close. The error is small, but it is still an error. The correction should be recorded with the date, the amount, the reason, and the entry that reverses it, so that anyone reviewing the account can follow the trail.
Finally, make sure the account is open before the first deposit arrives. Accepting a check into the operating account "for now" creates exactly the mix this check is meant to prevent. If the account is not ready, the firm should not take the money yet.
Check 4: record every deposit and withdrawal by client
Track every deposit and every withdrawal by client, so the firm can show the balance for each client at any time.
Use a separate transaction record or sub-account for each client. Each deposit entry should record the date, the amount, the source of the payment, and the purpose written in the engagement letter. Each withdrawal should point to a specific approved invoice or instruction. A withdrawal with no reference is a question waiting to be asked.
Reconcile the bank statement against the client records on a regular schedule. The total of all client balances should match the total in the account, after you account for items still in transit. When the numbers do not match, find the cause before the next transaction posts. Do not cover a difference by adjusting one client's balance to make the totals agree. Use the client bank reconciliation checks when reviewing balances.
Watch for negative client balances. If one client's balance goes below zero, the firm has used another client's money, which is the outcome this whole process is meant to prevent. Treat any negative balance as an urgent issue for the partner, not as a routine clean-up item.
A simple monthly routine helps. Pull the bank statement, update the transaction records for every item, compare the total of client balances with the bank balance, and have a second person review the worksheet. A reviewer who did not make the entries may notice a missing line that the preparer overlooked.
Store the transaction records, the bank statements, the reconciliation worksheets, and the signed letters together. Keep them in a form that someone other than the person who made the entries can read. If your state sets rules on how long these records must be kept, confirm them with your advisors before you set any schedule for disposing of them.
Check 5: set the rules for applying funds and returning the balance
Decide in advance how the firm will draw on each deposit and how it will return any unused balance, and put both rules in writing.
For applying funds, pick a clear trigger. It might be an approved invoice, a completed milestone, or a monthly billing cycle. Whatever trigger you choose, the operations lead should be able to check it against the work record before money moves. Avoid vague triggers like "as needed." They invite disputes and make it easy for funds to be drawn early.
Also decide who approves each draw. Where the firm has enough people, the person who approves the work should not be the same person who releases the payment. A short approval note on each draw gives the next reviewer something concrete to check.
For returns, write down the steps. Who confirms that the work is finished? Who prepares the final statement? How does the client receive any refund, and how long does that process take once the engagement ends? The engagement letter should say these things, and the process should match what the letter says.
Send the client a statement of the balance on a schedule that the engagement letter sets. A statement that shows the starting deposit, each approved draw, and the remaining balance lets the client check the firm's work. It also gives the firm an easy way to catch errors before they become disputes.
Do not move unused client money into firm income without a documented reason and the client's agreement. If the firm and the client disagree about what is owed, the disputed amount should be handled through a documented process. Ask an advisor how your state's rules treat disputed funds, and follow that guidance.
Put the schedule in the client file as well. When the operations lead sends the first statement, note the date. When the engagement ends, note the date the final statement went out and the date any refund was sent. These dates let the firm answer a client's question quickly, without rebuilding the history from memory.
Illustrative example: follow a deposit through an approved draw
An illustrative deposit of $50 covers future work. After an approved invoice of $20 meets the engagement letter's draw trigger, the operations lead records the draw and a remaining client balance of $30. The statement shows the starting deposit, the approved draw, and the balance. If the engagement ends with that balance unused, the firm follows the written return process.
Put the five checks into your intake routine
Run the five checks at intake, before the money reaches the bank. The partner should sign off on the classification in Check 1 and the terms in Check 2. The operations lead should confirm the account in Check 3 is ready, set up the client record in Check 4, and record the draw and return rules in Check 5.
Start today with one recent deposit. Walk it through all five checks as if it arrived tomorrow, and note each place where the firm would have had to guess. Those gaps are the work to do first, and they are easier to close before a new deposit arrives than after.
Questions before accepting a deposit
What if the terms change?
If the terms change, put the change in writing and have the client sign it. A verbal agreement made during a phone call is hard to find later and easy to remember differently by each side.
Does the checklist replace professional advice?
No, the checklist will not replace advice from a qualified professional about your state's rules. It does give your firm a repeatable way to ask the right questions every time, and it leaves a record that someone can review later. For a small firm, that record may matter as much as the decision itself.