Skip ahead to the main page
Partner Huddle
Pages

3 ways to handle a client's disclosure consent in Drake

Partner Huddle Editorial Team · Published · 13 min read

Drake offers three ways to handle a client's disclosure consent: sign in the software, sign the printed form, or mark the opt-out box.

Key takeaways

  • Choose the route by where the client signs: in the software during the visit, or on a printed form.
  • Confirm the recipient and purpose before anyone opens a form.
  • Mark the opt-out box only when the client declined or did not sign, and check that it matches the client's answer.
  • Write down the steps for your chosen route, including where the signed copy is filed.

When a client wants someone outside the practice to receive their tax information, the paperwork has to match the request. Operations leads rarely write the consent language themselves, but they do decide the mechanics: who hands over the form, what the client actually signs, and how the choice gets recorded in the software. Those mechanics matter more than most offices expect. A consent signed the wrong way, or logged where nobody checks, can be hard to find again months later.

The Drake Software knowledge base article on consent forms for use and disclosure of tax return information describes more than one way to handle the client's signature. This post compares the three main options that article lays out, explains how each works in practice, and offers a way to choose among them. It is written for operations leads who set the process, not for the preparer answering questions at the front desk.

Nothing here replaces the consent language or the rules your firm follows. Read the current article and your own written procedures before you change anything. If the two seem to disagree, follow the article for the software steps and ask firm leadership how to resolve the difference.

Who signs and what the client is signing

Settle two questions before you pick a method. The first is who needs to sign. For many returns that is the taxpayer. A method that works for a single filer can get awkward when two spouses are on the return and only one of them comes to the appointment. A short intake note listing the expected signers saves a lot of back-and-forth at the desk.

The second question is what the client is signing. The client should see exactly what they are agreeing to before signing. Keep a copy of each form version your office uses, and make sure staff know which version goes with which request. A staff member who grabs the wrong version because it was on top of the pile has created a problem the signature cannot fix.

The recipient matters too. The knowledge base article treats disclosure to a bank for bank products as its own case, so the route for that request can differ from the general one. Changing the plan is far easier at that point than after the client has signed.

The three options side by side

Option 1: sign in the software Option 2: sign the printed formOption 3: mark the opt-out box
Wording in the knowledge base article Have the taxpayer(s) sign the forms in the softwareHave the taxpayer(s) sign the printed form from Tools > Blank FormsMark the option box on the CONS screen
What the client doesSigns on screen during the visitSigns a paper copyDoes not sign, or opts out
Main question for your office Can signing happen during the client's visit?Who files the paper copy, and where does it go?Does the box match what the client chose?
Where it tends to fitClients in the office who are comfortable with a screenClients who prefer paper or sign away from the office Clients who decline or do not sign

The first two options are about how the client signs. The third records that the client did not sign or opted out, and the preparer marks that on the consent screen. For bank products, the article offers its own pair of routes, which the sections below cover where they differ.

Option 1: sign the forms in the software

Option 1 is the most direct route. The knowledge base article says to have the taxpayer(s) sign the forms in the software. The client signs while the form is open on screen.

That tight link is the main appeal. A client sitting in the office can review the consent, ask questions, and sign before leaving. Staff do not have to print, collect, and re-file anything, which removes a step where paper can go missing. For offices with steady in-person traffic, this route often becomes the default because the work stays in one place.

The trade-off is that the process depends on the screen. Staff need to know where the consent form opens, where the signed version ends up in your file system or the software, and what to do when a client wants a copy. Walk through the path yourself on the version your office runs, and write the steps down so a new employee can follow them without guessing. Menus change between versions, so a procedure written from memory tends to drift.

Decide who operates the screen during signing. The client should do the signing, and the staff member should step back far enough that the client can read the form without feeling rushed. If a client asks what the consent covers, answer from the form itself or say you will check and follow up. Guessing is how a client ends up signing something they did not understand.

This route also needs the client present. If the client cannot come in, a screen-based signature may not be practical, and the office will need the paper route or another plan. Decide that before the appointment so the client is not left waiting while staff work it out.

For bank products, the article presents signing in the software as one route: have the taxpayer(s) sign the forms in the software when disclosing to a bank for bank products. If your office handles bank requests often, test that path with one sample client and confirm the signed form lands where your procedure says it should.

Option 2: sign the printed form from the Tools menu

Option 2 covers the paper route. The knowledge base article says to have the taxpayer(s) sign the printed form from Tools > Blank Forms. The office prints the form from the software, the client signs the paper, and the office keeps the signed page as its record.

Paper suits clients who prefer to read a printed page, want time with the form, or will sign at home and return it. It also gives the office a fallback when a screen signature is not practical. Some clients feel more comfortable with a paper copy in their own hand, which can help when someone is nervous about sharing information with a new recipient.

Paper has its own risks. A printed form can be separated from its return and end up in a drawer or a client folder with no trace in the software. Set a rule for where the signed page goes on the day it is signed. Some offices scan it into the client file; others keep it with the return. Pick one approach, write it down, and check at the end of each week that nothing sits unfiled.

Print a fresh copy for each client rather than reusing one that carries another client's details. Check that the recipient and other details on each copy match the request, and give the client a copy if your procedure calls for it. A quick check before the client leaves catches most of the errors paper invites.

For bank products, the article gives a printed-form route as well: have the taxpayer(s) sign the printed form for disclosure to a bank for bank products. The wording differs from the general text, so read the bank section before applying these steps to a bank request. Keep bank-product paper in a clearly labeled place so it can be found quickly if the bank or the client asks later.

Option 3 is different in kind. It is not a signature route. The knowledge base article says to mark the option box on the CONS screen to indicate that the taxpayer opted out or did not sign the Consent to disclose to the master EFIN. The record shows what the client chose: they opted out or did not sign.

This matters because the box is easy to click and easy to forget. A preparer who marks it when the client actually signed creates a record that contradicts the signature. A preparer who skips it when the client declined leaves a gap someone will have to explain later. The record has to match the client's answer, and the answer has to match what happened in the room.

Build a short check into the routine. When a client declines or does not sign, the preparer confirms the answer aloud, marks the box, and notes the date and who was present. A second person can review the consent screen at the end of the day to confirm the box matches the intake sheet. Keep the check simple enough to survive a busy season.

The article ties this box to one specific consent. If your firm handles more than one kind of disclosure, be clear with staff about which consent the box refers to. Write one sentence in your procedure that says exactly which consent the box stands for.

Choosing among the three for your office

Start with where most signatures happen. If most clients sit at a desk in the office, Option 1 is the natural default. If many clients sign at home or prefer paper, Option 2 gives you a reliable second route. Option 3 is not something a client picks during a signing session. It is what you record when a client declines or does not sign, so the procedure should cover it too.

Then think about how the record will be checked later. Ask who will review the consent after filing and what they will look for. An operations lead who can answer that in a sentence has probably picked a sensible route. If not, keep one default and document the exceptions so a later reviewer can follow the logic without interviewing staff.

Pilot the plan first. Pick a few upcoming appointments, run them through the chosen route, and note where staff hesitated, where paper went astray, or where the box did not match the client's answer. Adjust the procedure, then roll it out to the full office.

Avoid switching methods mid-season without a clear reason. Staff who learn one routine well make fewer mistakes than staff juggling three. If you add a route, train everyone at the same time and update your written procedures the same day.

Illustrative example: choosing a default route

Most of them come in and sit at the desk, so staff make signing in the software the default. Two clients ask to read the form at home, so staff print those forms from Tools > Blank Forms and file each signed page the same day. One client declines, so the preparer confirms the answer aloud, marks the opt-out box, and notes the date.

Training staff so every route runs the same way

Procedures on paper do not help if the people in the room do not know them. Training should cover the three routes, the bank-product path, and the decision points where staff choose between them. Use screens from your own software version rather than memory or old screenshots, since outdated pictures teach the wrong steps.

Run a short walkthrough for each route. Let each staff member perform the steps on a practice file rather than watching someone else do them. Then ask what they would do if a client wanted a copy, wanted to change the recipient, or refused to sign. Their answers show where the procedure is unclear, and those gaps are worth fixing before busy season starts.

Assign one go-to contact for consent questions. That person should know where the written procedure lives and who decides when a case falls outside it. Put that contact in the procedure document so nobody has to ask around during an appointment.

Revisit training at the start of each filing season and whenever the consent screens or form versions change. Keep a short log of who was trained and when. The log also helps you find a staff member who missed the session before they handle their first consent.

When a client changes their mind

Clients sometimes change their answer after signing, or decline at first and later ask to sign. The procedure should say what happens in each case. The main rule is that the software record and the paper record should never disagree without an explanation.

If a signed consent is withdrawn or changed, do not simply delete the old entry. Record the change, note the date and the reason the client gave, and keep the earlier version if your procedure calls for it. The aim is a clear history, because a reviewer who sees a gap will ask why it is there.

If a client who opted out later wants to sign, treat it as a new consent event. Use the route the client chooses, obtain the signature the usual way, and update the record. Do not assume the earlier opt-out mark carries forward. Check the consent screen afterward so the software reflects the new answer.

Tell the client what happens next. A short sentence confirming that their consent is on file, and what it covers, prevents confusion later in the season. Keep the wording consistent across the office so two staff members never give different answers to the same question.

Logging the choice and keeping it findable

Whichever route you choose, the record should answer three questions quickly: who signed or declined, which route was used, and when it happened. If a reviewer must open three screens and a filing cabinet to answer those, the process is too hard to audit, and staff will start cutting corners under pressure.

Use the same naming and filing pattern for every client. The signed paper, the scanned copy, and the software entry should carry the same client identifier and date. Consistency matters more than the specific scheme. A pattern the whole office follows is easier to search than a clever system only one person understands.

Check the screen after you enter each consent. Do this at the moment of entry, not at the end of the week when the details have faded.

Review records on a regular schedule. A monthly or end-of-season look at a sample of files shows whether the procedure is being followed and lets you fix drift early. When you find an error, correct it under your procedure and note the correction rather than overwriting the old entry without a trace. A visible correction shows a working process, while a silent overwrite causes trouble later.

Finally, keep bank-product consents easy to separate from the rest. Banks and lenders tend to ask about specific requests, and a labeled folder makes those faster to answer. The few minutes it takes to set this up now will pay off the first time someone needs a specific consent in a hurry.

Your next step

Today, open your current consent form in the software version your office runs and walk through Option 1 from start to finish. Write the steps on one page, and name the person who keeps that page up to date.

Frequently asked questions

Can a client sign the consent away from the office? Yes, Option 2 uses the printed form, which suits clients who sign away from the office and return the page.

Which option records a client who declines? Option 3 records that a client declined, by marking the opt-out box on the CONS screen.

Does the client always need to be present? No, Option 1 needs the client at the office during signing, while the printed form in Option 2 can be signed elsewhere.

Sources