Skip ahead to the main page
Partner Huddle
Pages

Form 8857 innocent spouse relief: 3 checks first

Partner Huddle Editorial Team · Published · 12 min read

Before requesting innocent spouse relief on Form 8857, check existing requests, collection timing and plans for contact with the other spouse.

Key takeaways

  • Check existing requests and document which tax years they cover.
  • Pull transcripts and flag collection timing questions for review.
  • Discuss spouse contact, settlement documents and firm conflicts before filing.

Why joint filers end up here

Innocent spouse relief is a request asking the IRS to release one spouse from a joint return's tax liability when holding both spouses responsible would be unfair. The IRS has a process for that question, and it runs through one form. Before your firm gathers documents, sends a letter, or promises anything, it helps to know what the form does, what happens after it is filed, and which facts need checking first.

Small firms often meet these cases at a bad moment. The client has just received a notice, the marriage has ended or is ending, and the client wants someone to "just send the form." The operations lead may be asked to start the paperwork the same week. That pressure is the reason for a checklist. A firm that runs the same few questions every time is less likely to file something it should not have, and less likely to miss something that would have helped.

This post is written for partners and operations leads at small firms that handle joint-return clients facing collection problems. It is not legal advice, and it does not replace a tax attorney or an enrolled agent who can review the full facts of a case. Treat the three checks below as screening questions. Each one can be answered with records a firm usually already has, and each one comes before a decision to file, not after.

Start with the form

The basic rule is short. To request relief, the taxpayer must file Form 8857, Request for Innocent Spouse Relief, according to the Taxpayer Advocate Service guidance on innocent spouse relief. Other papers can help explain the facts of a case, such as a divorce decree, a letter from a former spouse, or notes from a call with the IRS. None of them is the request itself.

That distinction matters in practice. Clients often say they "already told the IRS" or "already sent something." Ask what was sent, to whom, and on what form. A note about a call is not the same as a filed request, and a firm that treats the two as equal can lose track of where a case really stands. The same goes for a statement the client wrote out and kept at home. Write down exactly what exists, and label each item by its type.

It also helps to separate two questions that clients tend to blend together. The first is whether the client has a basis to ask for relief at all. The second is whether the timing and the paperwork let the request be considered. The three checks in this post address the second question, but a firm should not skip the first. Relief depends on facts about the return, the balance, and the spouses' roles, and those facts need a professional's review before anyone signs.

What a complete file looks like

Before you run the checks, use the client intake checklist to organize the basic pieces. A complete starting file usually includes the joint returns for each year at issue, any IRS notices about those years, account information for each year, and the client's own summary of what happened in plain words. If the spouses are separated or divorced, the file should also hold any court order or settlement that mentions taxes.

Ask the client to write a short timeline in their own words. Keep it factual. Who prepared the return, who handled the income and deductions, when the couple separated, and when the client first heard about the balance. The timeline will not decide the case, but it shows you where the facts are thin and where the client's account may conflict with the paper record.

Keep the file organized by tax year, not by document type. Each tax year is its own question, and a file sorted by year makes it easier to see which years have a request, which have a clear timing picture, and which need more information from the client.

Check 1: is a request already on file?

Start by checking for an existing request. Before you prepare anything new, find out whether a request has already been filed for the tax years in question, and by whom. The client, a former spouse, or a previous preparer may have sent something to the IRS, and the firm may not know about it.

This matters because the IRS handles an existing request differently from a new one. The Tax Adviser reported on the IRS's 2011 change in how it would consider these requests, and that report included this point: "For requests already submitted (normally, by filing Form 8857, Request for Innocent Spouse Relief) but not yet ruled upon by the IRS, taxpayers should not reapply." You can read the full report at The Tax Adviser.

A practical way to run this check looks like this:

  • Ask the client directly whether anyone has sent the IRS a request about the balance, and whether a former spouse has been contacted about it.
  • Search the client's file for any copy of Form 8857, any acknowledgment letter, and any IRS notice that mentions a request or a claim of innocent spouse relief.
  • Ask whether a prior preparer or representative handled the matter. If the client authorizes it, request that file as well.
  • List each tax year separately. Document which years an existing request covers.
  • Write down what you found and where you found it, even if the answer is "nothing." A dated note is easier to rely on later than a recollection.

Common mistakes in this check are predictable. A possible mistake is treating a verbal statement from the client as proof that a request exists, or treating a request as proof that it is still active. Another is assuming that the preparer who handled the original return would know about any later filing. Neither assumption should go into the file without a document behind it.

If a request is already pending, your work changes. The question is no longer how to file. It is how to follow up, what to track, and how to keep the client informed while the IRS works through the case. A duplicate can create confusion about which request the IRS should be reviewing, and it is the kind of problem that is hard to untangle after the fact.

Check 1 is done when you can state, in one sentence for each tax year, whether a request exists, who filed it, and what the file shows about its status.

Check 2: is the collection clock still running?

The second check is about timing. A client may have a strong story about why the balance should not be theirs alone, but the request still has to fit the window the IRS will consider. Firms sometimes assume there is a short, fixed deadline that applies to every case. The rule that matters here is more specific, and the source you rely on matters a great deal.

The Tax Adviser's coverage of Notice 2011-70 says the IRS would consider requests for equitable relief from joint and several liability under section 6015(f) at any time if the limitation period for collection under section 6502 remains open for the tax years at issue. The same report adds the general period: "6502 remains open for the tax years at issue (generally, 10 years after an assessment)." See The Tax Adviser for the context.

Two cautions apply. First, the article is from 2011, so confirm the current IRS guidance before you rely on it for a live case. Second, its headline describes the IRS giving up a two-year limitation on equitable relief requests. A client or another preparer may still cite a two-year rule from older discussions. Check the current position before you accept either version.

Illustrative example: flag a timing question

Suppose an assessment is 10 years old. That year deserves a closer look from the partner rather than an assumption that the collection window remains open. Keep the transcript with the timing note, and confirm the current guidance before recommending a filing.

The steps for this check are straightforward:

  • Pull the account transcripts for each tax year on the request, and note the assessment dates shown there.
  • For each year, count forward from its assessment date under the generally applicable ten-year period, and mark where the window still appears open.
  • Flag any year where the window is close to ending, so the partner can review it first.
  • Keep the calculation in the file with the transcript it came from, so someone else can check your work.
  • Note that the rule described above concerns equitable relief under section 6015(f). If the client may qualify under a different type of relief, check that type's rules separately before applying this timing reasoning to it.

Check 2 is finished when every year on the request has a documented assessment date and a clear note about whether the collection window appears open. If a year cannot be confirmed from the transcripts you have, say so in the file and ask for the missing record. Do not fill the gap with an estimate and present it as fact.

Check 3: will the other spouse be contacted?

The third check is about people. Clients focus on the IRS, but processing a Form 8857 also involves the other spouse. The Taxpayer Advocate Service guidance says that, as part of processing the form, the IRS is required by law to contact the spouse or former spouse to ask whether they want to participate in the process. You can read that guidance at the Taxpayer Advocate Service.

For a small firm, that requirement has four practical consequences.

Client expectations. Discuss the contact with the client early, and in writing. Many clients do not expect this, and a client who learns about the contact after it happens may feel the firm kept something from them. Let the client decide how to handle that before the form goes in.

Contact details. Ask whether the client has a current address and phone number for the other spouse, and whether the client knows if that person has moved. If the client has a concern about safety, or describes a relationship that involves abuse or threats, stop and direct the client toward appropriate help before going further. A tax filing is not the place to manage that risk, and a firm should not treat it as routine paperwork.

Divorce and settlement terms. In a divorce or separation, ask whether a court order, settlement agreement, or other document addresses the tax debt, and who is responsible for it under those terms. Get copies if the client has them. Do not interpret the effect of a settlement on tax liability yourself. A qualified professional should review that question, because how a settlement affects what the IRS can collect is a legal matter.

Firm conflicts. If your firm prepared the joint return for both spouses, check your conflicts position before advising either one. A spouse who asks you to help them request relief may be asking you to take a position against the other spouse, who may also be your client or a former client. Talk with your professional-responsibility resources or an attorney before you advise either side. Document the outcome of that review in the file.

Check 3 is finished when the client has acknowledged the contact discussion, the contact information question is answered, any settlement terms are on file or noted as missing, and the firm has cleared its conflicts position.

Where clients can get help

Some clients will need more than a small firm can offer, particularly if they cannot afford full representation. The Taxpayer Advocate Service guidance points readers to the LITC Page, or to Publication 4134, Low Income Taxpayer Clinic List, for more information or to find a clinic near them. Start with the TAS innocent spouse page to find that guidance.

For a firm, this is a referral path to know before you need it. Keep a current list of clinics that serve your area, and check that list when you open a joint-return file, not after a case is already in trouble. Ask a clinic what help it can offer before referring the client.

When you refer a client, hand over a short summary, not the whole file. The summary should list the tax years at issue, what you found on each of the three checks, and any open questions. A clear summary means the next preparer does not start from zero, and it keeps the client from having to repeat the same story to several people. Get the client's written permission before you share anything with an outside clinic or representative.

What to tell the client at the start

Clients who are facing collection problems are often anxious, and that anxiety can push them toward quick promises from anyone who sounds confident. A firm can help by setting expectations early. Explain that the firm's checks are there to make sure the request is accurate and timely, not to guarantee an outcome.

A plain-language summary that states what will be checked and what cannot be promised helps set those expectations, and it keeps the firm from taking on work that will not help the client.

Write the explanation down and have the client sign or acknowledge it in the file. It is a record that the client knew what the firm was checking and what the firm could not promise.

Putting the three checks together

Run the checks in order, and record each result in the client file.

Once the three checks are complete, make the recommendation the facts support. That might be to file, to wait while an existing request is reviewed, to refer the client to a clinic, or to tell the client that the records do not support relief at this time. Each of those answers is legitimate. What is not acceptable is an answer that goes beyond what the file shows.

A firm that finishes these checks before the client signs is in a better position to give an honest answer and explain it clearly. It is also better placed to handle the follow-up, whether that is a question from the IRS, a call from the other spouse, or a change in the client's circumstances. Keep the checklist in the file so the next person who opens it can see what was done, what was not, and why.

Today, open the client file and list the tax years, existing request documents and missing records before preparing any new paperwork.

Questions before filing

What should the firm record about an earlier request?

Record who filed it, which tax years it covers and what documents show its status. Keep the supporting correspondence with the relevant year.

What if an assessment date is missing?

Ask for the missing record before presenting a timing calculation as fact. Mark the question as unresolved in the file.

What should a referral summary contain?

Include the tax years, the results of the three checks and the remaining questions. Obtain written permission before sharing it.

Sources