Skip ahead to the main page
Partner Huddle
Pages

Form 943 due dates and 2 deposit schedules for farm payroll

Partner Huddle Editorial Team · Published · 12 min read

Form 943 is the annual federal return for farm wages, generally due January 31 of the following year. Farm payroll runs on its own calendar. Seasonal crews come and go, some workers are paid by the piece and others by the week, and a client may run a short payroll one year and a much larger one the next.

This post covers the parts of Form 943 that most often cause confusion in a small firm: who has to file, the due dates and the February 10 date, and the two deposit schedules that apply to filers. It also explains where a client's schedule comes from and how to build a calendar for each client. It is written for partners and operations leads who already know the general payroll cycle. Rules and figures change, so open the linked page and confirm the current wording before you advise a client.

Key takeaways

  • Total each client's cash and noncash wages for all farmworkers and compare the result with $2,500.
  • Put January 31 of the following year on the calendar as the default due date.
  • Use February 10 only when every Form 943 deposit was made when due.
  • Sort the client by the Form 943 tax reported in the lookback year, using the $50,000 line.
  • Keep the client on the annual list until a final return is filed.

Who has to file Form 943

The starting point is whether the client has to file at all. The IRS describes the requirement this way: "Employers who paid wages to agricultural employees (farmworkers) that are subject to federal income tax withholding or Social Security and Medicare taxes must file a Form 943, Employer's Annual Federal Tax Return for Agricultural Employees." ( IRS, Topic no. 760)

Two parts of that sentence matter in practice. The first is the kind of work. The return covers wages paid to agricultural employees, so office staff, retail workers, or a processing operation may belong on a different return. Sort each worker by the work actually performed before deciding which form applies, and record the reason in the client file. The second is the type of wage. The test is whether the wages are subject to federal income tax withholding or to Social Security and Medicare taxes. Paying a worker does not answer that question by itself, so the firm should check how each payment was treated on the payroll records instead of assuming that all payments were taxed the same way.

The IRS also states the filing requirement in dollar terms. The requirement applies when "The total (cash and noncash) wages that you pay to all farmworkers is $2,500 or more." ( IRS, Topic no. 760) The test adds wages across all farmworkers, and it counts noncash wages as well as cash. A client that looks only at the checks it wrote may undercount. Pull the full year's wage records for every farm worker, add the totals together, and then compare the result with the threshold. A client near the line should have the figure checked twice, because a few small payments can add up to the threshold without any one of them looking large.

Illustrative example: the $2,500 wage test

Consider a made-up farm, not a real client. Suppose it paid $2,500 in wages to its farmworkers across the year, counting cash and noncash pay together. That total meets the threshold, so the firm files Form 943 and puts January 31 of the following year on the calendar. Building the figure from the wage records, rather than from the checks alone, keeps the total defensible.

Records matter here more than most firms expect. Farm payroll often mixes workers paid in different ways, and a payroll system set up for year-round employees may not capture seasonal pay cleanly. Before the season starts, check that the system records each wage payment with the date, the worker, and the amount, so that the year-end total can be built from the records rather than reconstructed from memory. A total built from memory is hard to defend. For the employee-side records, see Client payroll employee file: 4 checks before pay.

The obligation does not end after the first filing. The IRS states: "After you file your first Form 943, you must file a return for each year, even if you have no taxes to report, until you file a final return." ( IRS, Topic no. 760) A quiet year still needs a return. A client whose operation shrank, or who had no reportable wages in a given season, should not drop off the filing calendar. Keep the client on the annual list until a final return has been filed, and note in the file that the client is still on that list.

Intake is a good place to settle these questions early. When a new farm client arrives, ask for the prior year's payroll summary, the list of workers with the work each one does, and a note of how the operation pays its crews. The answers do not decide the filing question alone, but they show which records the firm has to rebuild and which ones the client already keeps. Partners and operations leads should agree on who collects this information, because a missing record often surfaces only after the January deadline has passed. For a fuller intake list, see Accounting Client Intake Checklist for a Clear Handoff.

Filing deadlines and the February 10 date

The general rule is short: "Generally, you must file your Form 943 by January 31 of the year after you paid the wages." ( IRS, Topic no. 760) Wages paid in a given calendar year therefore generally go on a Form 943 due by January 31 of the following year. For a firm managing many clients, January 31 should be the default date on every farm client's calendar. The firm works back from that date when it plans the year-end review, the wage reconciliation, and the client meetings that come before them. The January 31 date falls at the start of the year, when many firms are also busy with other clients' returns. Planning the year-end work in the fall gives the firm room to reconcile the wage records, check the lookback figure, and send the client a summary before the crunch.

There is a later date available under one condition. The IRS says: "If you deposited all Form 943 taxes when due, you may file by February 10." ( IRS, Topic no. 760) The condition is the important part. February 10 is not a second deadline that every client receives. It applies only when all Form 943 taxes were deposited on time. A client that missed a deposit, or whose deposit records are incomplete, should stay on the January 31 date, and the firm should plan to file by that date even if the paperwork is still open.

That creates a practical sequence. Before the firm relies on February 10, it needs to pull the deposit history for the year and confirm that each deposit was made when due. If the records are clean, the later date is available. If they are not, file on January 31 and do not plan around a date the client has not earned. Write the check and its result in the file, so the reasoning is visible to the partner who reviews the work.

When a deposit was missed, the question is no longer a calendar question. It becomes a conversation with the partner and the client about what went wrong, what records exist, and what the IRS guidance says about the consequences. This post does not describe those consequences, and the firm should not improvise them. The practical point is that a missed deposit should be found early, while the year is still open, rather than at the end of January when the return is due.

It helps to keep two questions apart. The filing date answers when the return is due. The deposit schedule, covered next, answers when tax must go into the federal system during the year. A client can file on time and still have a deposit problem, and the two are checked on different dates and against different records. Keep separate lines for each on the calendar so one does not hide the other. A shared view makes it easier to see which clients share the same January pressure.

Monthly and semiweekly deposit schedules

Form 943 tax is not paid once a year. The IRS explains: "If your total employment taxes will exceed $2,500 in the year, you'll have to make electronic deposits throughout the year as a monthly schedule depositor or a semiweekly schedule depositor." ( IRS, Topic no. 760) Two points stand out. The $2,500 in this rule refers to total employment taxes, not wages, so it is a different test from the $2,500 wage threshold that controls who files. The rule also requires electronic deposits, so the firm should confirm that the client has set up electronic payment and that a named person is responsible for making each deposit.

Electronic deposits are a process, not a single event. The firm should write down who logs in, who approves the payment, and what backup is in place if the usual person is away during a busy harvest. A plan that names people makes a missed deposit less likely.

Which schedule applies is set by the lookback period. The IRS says: "For Form 943, the lookback period is the second calendar year preceding the current calendar year." ( IRS, Topic no. 760) For deposits in any given year, the lookback year is the second calendar year before it. The firm looks at what the client reported on Form 943 in that year, not at how the current year is shaping up.

The schedule turns on the amount of tax reported in that lookback year. The IRS guidance gives two cases. In the first: "If, during the lookback period, you reported $50,000 or less of tax on Form 943, you're a monthly schedule depositor." ( IRS, Topic no. 760) In the second: "If you had over $50,000 of Form 943 tax, you're a semiweekly schedule depositor." ( IRS, Topic no. 760) The dividing line is $50,000 of Form 943 tax. A lookback total of exactly $50,000 falls in the monthly group, and anything above it falls in the semiweekly group.

The table sets the two options side by side.

Feature Monthly schedule depositorSemiweekly schedule depositor
Lookback testReported $50,000 or less of Form 943 tax in the lookback period Reported over $50,000 of Form 943 tax in the lookback period
Deposit methodElectronic deposits throughout the year Electronic deposits throughout the year
Calendar to buildA monthly deposit calendar for the clientA semiweekly deposit calendar for the client
Question for the clientDid the lookback-year total stay at or below $50,000?Did the lookback-year total go above $50,000?
Filing date if deposits were on timeForm 943 may be filed by February 10Form 943 may be filed by February 10

The two schedules share the same deposit method and the same February 10 condition. They differ in the lookback test that sorts a client into one group or the other, and that is why the lookback figure is the number to get right. For the timing that applies to each schedule, follow the IRS guidance linked above and build the calendar from the current text rather than from a habit carried over from last year.

A useful habit is to record the lookback figure and the resulting schedule in the client file at the start of each year. Each year's Form 943 tax becomes the lookback figure two years later, so ask the operations lead to flag large swings in payroll, because they will matter for the schedule in two years.

Unemployment taxes alongside Form 943

Unemployment taxes sit beside the Form 943 analysis, not inside it. Paychex explains that the federal obligation "is in addition to state unemployment insurance, often referred to as SUTA." ( Paychex, What Is FUTA?) The same source describes the state piece this way: "The State Unemployment Tax Act, or SUTA, is a state-level tax paid by employers to fund unemployment compensation." ( Paychex, What Is FUTA?)

The Form 943 quotes earlier in this post cover federal income tax withholding and Social Security and Medicare taxes. They do not cover the unemployment side, so a review of the annual return does not show whether unemployment taxes were handled correctly. Give those a separate line on the calendar and a separate checklist. Because SUTA is a state-level tax, the firm also needs to check the rules for each state where a client has employees, and it should not assume that the answer for one state carries over to the next. For the state side, see Check 8 state reporting steps before payroll starts.

The person who prepares Form 943 may not be the person who handles state unemployment filings, and the two can drift apart. Assign each side an owner, and ask the operations lead to confirm in which states the client's workers are employed. Keep that answer in the client file, since it decides which state rules the firm has to check.

Building the calendar for each client

The steps below put the rules in order. Use them as a checklist when a farm client comes in or when the year turns.

  1. Confirm the client has agricultural employees and sort each worker by the work performed.
  2. Add the year's cash and noncash wages for all farmworkers and compare the total with $2,500.
  3. Put January 31 of the following year on the calendar as the default Form 943 due date.
  4. Once a first Form 943 is filed, keep the client on the annual list until a final return is filed.
  5. Pull the Form 943 tax reported for the lookback year, the second calendar year before the current one, and sort the client by the $50,000 line.
  6. Set up electronic deposits and assign one person to make them.
  7. Before counting on February 10, confirm that every deposit was made when due.
  8. Check unemployment taxes on a separate list for each state where the client has employees.

Penalties for missed deposits or late returns are outside the scope of this post, and the IRS pages linked above are the place to check them. The aim of the calendar is simpler: to make sure a client's January 31 date, its lookback-based schedule, and its unemployment obligations are each visible before the season starts. A calendar reviewed at the start of each year gives the firm time to fix a problem before a deadline arrives.

Next step today: pull the year's wage records for every farm worker and add the cash and noncash totals to check them against $2,500.

Frequently asked questions

Is February 10 a deadline for every farm client?

No. February 10 applies only if all Form 943 taxes were deposited when due; otherwise the January 31 date stands.

Which deposit schedule does a client follow?

A client follows the monthly schedule if its lookback-year Form 943 tax was $50,000 or less, and the semiweekly schedule if it was over $50,000. The lookback year is the second calendar year before the current one.

Does a quiet year still need a Form 943?

Yes. After the first Form 943 is filed, a return is required each year, even with no taxes to report, until a final return is filed.

Sources