When the new-hire report is due after a client hires someone
The 20-day clock starts when the client's new employee begins work, not when the first paycheck is cut. California’s New Employee Registry requires employers to report newly hired employees to the NER within 20 calendar days of their start-of-work date, according to California Employment Development Department. Texas uses a slightly different trigger point. Federal and state law requires employers to report new hires and rehires within 20 calendar days from the date the employee starts earning wages, according to Texas Office of the Attorney General.
Key takeaways for new hire report deadline before the client's next payroll
- California requires employers to report new or rehired employees to the New Employee Registry within 20 calendar days of the start-of-work date, which is the first day services were performed for wages, according to California Employment Development Department.
- In California, any employee who is rehired after a separation of at least 60 consecutive days must also be reported within 20 calendar days, according to California Employment Development Department.
- New York State requires reporting newly hired or rehired employees who will be employed in the state within 20 calendar days from the hiring date, according to New York State Department of Taxation and Finance.
- Washington State law requires employers to report all newly hired or rehired employees working in the state to DCS within 20 days of the employee's start date, according to Washington State Department of Social and Health Services.
- Write the specific state deadline on the payroll intake note the same day the client provides the start date.
Set the anchor date at intake
For your firm, the practical difference is the anchor date. California’s page ties the deadline to the "start-of-work date." Texas’s page ties the deadline to the date the employee "starts earning wages." Texas counts from the date wages begin, so a delayed payment does not establish a later reporting trigger.
When you receive a new hire from a client, record the specific start date immediately. Do not assume the start date is the same as the first payday. Write the start-of-work date on the payroll intake note the same day the client tells you (see the Accounting Client Intake Checklist for a Clear Handoff). This date is the anchor for the 20-day deadline in both states. If the client hires someone who starts work on a Friday, the 20-day count begins that Friday. If the client hires someone who starts work on a Monday, the 20-day count begins that Monday.
The 20-day report in California and Texas
California’s New Employee Registry requires employers to report new hires within 20 calendar days of the start date. According to the California Employment Development Department, this 20-day window also applies to rehires. If a client’s former employee returns after a separation of at least 60 consecutive days, the firm must treat that return as a new reporting event. The clock starts on the day the employee begins work again.
For employers who report electronically through e-Services for Business, the submission schedule has specific spacing requirements. According to the California Employment Development Department, these employers must submit two monthly reports that are not less than 12 days and not more than 16 days apart. This spacing rule applies to the monthly batches, not the individual 20-day deadline for each new hire. The firm must ensure its electronic filing calendar reflects this 12-to-16-day gap between the two required monthly submissions.
In Texas, the Office of the Attorney General provides a practical guideline for determining who must be reported. According to the Texas Office of the Attorney General, a good rule of thumb is if the employee is required to fill out a W-4 form, that employee must be reported. This W-4 check serves as a quick filter for the firm’s payroll intake process. If the client’s new hire completes a W-4, the firm should flag that individual for the state new-hire report. This rule of thumb helps the firm avoid missing reportable employees during the initial setup phase.
Texas also has guidance for employers reporting for the first time. According to the Texas Office of the Attorney General, employers reporting for the first time should submit all employees hired within the last 90 days. If a client is new to the firm and has never filed a Texas new-hire report, apply this guidance to the firm's first filing.
New York's 20-day report and the contractor dollar test
New York State Department of Taxation and Finance sets specific timing rules for different types of hires and reporting methods. For standard new hires, the state requires reporting within 20 calendar days. However, the trigger date changes if the employee is a non-U.S. resident (nonresident noncitizen) visa employee. In that case, the 20 calendar day clock starts from the date the employee receives a Social Security number (SSN) from the Social Security Administration, not necessarily the start of work, according to New York State Department of Taxation and Finance.
There is also a separate requirement for independent contractors. Effective January 1, 2022, employers are required to report individuals under an independent contractor arrangement with contracts in excess of $2,500, according to New York State Department of Taxation and Finance. This contractor threshold is distinct from the standard employee new hire report. This $2,500 contractor rule is a New York requirement.
If your firm reports electronically, there is a specific spacing requirement. You must submit two monthly reports (if needed) between 12 and 16 days apart, according to New York State Department of Taxation and Finance. This spacing rule applies to electronic filers and is separate from the initial 20-day deadline for individual hires.
When setting up payroll for a New York client, check if the hire is a nonresident noncitizen visa employee. If so, wait for the date the employee receives the SSN before starting the 20-day count. If the client uses independent contractors, check if any contracts exceed $2,500. If so, ensure those are reported as required by the effective January 1, 2022 rule. For electronic filers, plan your submission schedule to keep the two monthly reports, if needed, between 12 and 16 days apart. Write the specific New York deadline trigger on the payroll intake note the same day the hire is confirmed.
Washington's 20-day report and the 60-day rehire rule
Washington law requires employers to report newly hired and rehired employees to the Division of Child Support within 20 days of the hire or rehire date. This requirement applies regardless of the employee's age or the number of hours they work, as stated in RCW 26.23.040, according to Washington State Department of Social and Health Services. The 20-day clock starts on the date of hire or rehire, not the date the report is filed.
The state defines a newly hired employee in three specific ways. First, the person has not worked for the employer before. Second, the person has returned to work after a separation of at least 60 consecutive days. Third, the person has started working under a new Federal Employer Identification Number, according to Washington State Department of Social and Health Services. This 60-day separation threshold is one trigger that makes a returning employee subject to the new-hire report in Washington. If a client rehires someone who left less than 60 days ago, that person may still count as newly hired if they start working under a new Federal Employer Identification Number.
For employers reporting for the first time, the Washington State Department of Social and Health Services specifies a particular scope for the initial submission. You should only report employees hired since your last quarterly report to the Employment Security Department. The DCSOnline system accepts reports with a date of hire no more than one year in the past and 90 days in the future, according to Washington State Department of Social and Health Services. This means that if a client has not filed a quarterly report recently, the first-time new-hire report is limited to hires since that last quarterly filing, not all employees currently on the payroll.
When setting up payroll for a client in Washington, note the 60-day separation rule in the client payroll employee file. If the client rehires a former employee, check the separation date against the 60-day threshold before deciding whether a new-hire report is required. Write the hire date and the separation date (if applicable) on the payroll intake note the same day the start date is confirmed. This ensures the 20-day deadline is tracked from the correct trigger date.
Reference table of the four state reports
The table below lists the reporting deadlines and specific qualifiers for the four states covered in this guide. Each row cites the publisher that states the rule.
| Publisher | Deadline | Key Rule or Qualifier |
|---|---|---|
| California Employment Development Department | 20 calendar days | Report newly hired employees to the NER within 20 calendar days of their start-of-work date. |
| Texas Office of the Attorney General | 20 calendar days | Federal and state law requires employers to report new hires and rehires within 20 calendar days from the date the employee starts earning wages. |
| New York State Department of Taxation and Finance | 20 calendar days | You must report newly hired or rehired employees who will be employed in New York State within 20 calendar days from the hiring date. |
| Washington State Department of Social and Health Services | 20 days | Federal and state law requires employers to report all newly hired or rehired employees working in Washington state to DCS within 20 days of the employee's start date. |
According to California Employment Development Department, the clock starts on the start-of-work date. According to Texas Office of the Attorney General, the clock starts when the employee starts earning wages. According to New York State Department of Taxation and Finance, the clock starts from the hiring date. According to Washington State Department of Social and Health Services, the clock starts from the employee's start date.
Write the specific start-date trigger for your client's state on the payroll intake note the same day you receive the hire information.
A tracking table for the next employee the client hires
Use this table to track the next hire before the payroll run.
| Item | Start-of-work date | State | Calculated due date |
|---|---|---|---|
| Example | Date the client confirms | State where the employee works | Start date plus 20 calendar days |
The California Employment Development Department defines the start-of-work date as the first day services were performed for wages, which triggers the 20 calendar day reporting window according to California Employment Development Department. Enter the client’s confirmed start date in the second column, the state in the third, and the calculated due date in the fourth. This worksheet is a reminder for your intake process, not a statement of a specific employee’s data.
Related guides: New-hire report within 20 days: 7 data fields · Check 5 mileage-log details before a client's return.
New-hire report FAQ
How many days does California allow for a new-hire report?
Employers report their newly hired employees to the NER within 20 calendar days of their start-of-work date, according to California Employment Development Department. The clock begins on the day the employee starts working.
What does Texas say about a W-4 form?
The Texas Office of the Attorney General notes that a good rule of thumb is if the employee is required to fill out a W-4 form, that employee must be reported, according to Texas Office of the Attorney General. Use the W-4 requirement as the trigger for reporting.
What does New York add for contractors?
New York requires employers to report independent contractor arrangements with contracts exceeding $2,500, effective January 1, 2022, according to New York State Department of Taxation and Finance.
How does Washington define a rehire?
One qualifying case is a return to work after a separation of at least 60 consecutive days, according to Washington State Department of Social and Health Services. The 60-day separation period is one threshold that triggers the rehire report.
Do electronic filers use a different spacing of reports?
Employers who report electronically through e-Services for Business must submit two monthly reports that are not less than 12 days and not more than 16 days apart, according to California Employment Development Department. This spacing rule applies specifically to electronic filings in California.