Skip ahead to the main page
Partner Huddle
Pages

Pass-through deposit insurance: 2 cases for client money

Partner Huddle Editorial Team · Published · 12 min read

Pass-through deposit insurance lets a bank look past the firm holding a client account and insure each owner's share up to $250,000. Partners and operations leads often assume that one account at a bank covers every client dollar inside it, or that a client's money is protected the same way as money the client deposits directly. Neither assumption holds in every case. Both cases below are described in general terms. The goal is to give partners and operations leads a shared vocabulary and a clear view of which numbers matter.

Key takeaways

  • Ask the bank whether it treats each client as the owner, because that decides which limit applies.
  • Total each client across every single account that client holds at the same bank.
  • When pass-through conditions are not met, balances combine in the firm's name and share one $250,000 limit.
  • Keep a record that ties each balance to its owner, and reconcile it on a regular schedule.

The FDIC's guidance on pass-through deposit insurance explains how deposits placed by a third party, such as a broker or other fiduciary, can be insured to the people who own them. It also explains what happens when the conditions for that treatment are not met. This post walks through two cases built on that guidance: one where coverage passes through to each client, and one where the deposits are combined in the intermediary's name. The examples use the $250,000 figure the FDIC states. They are a plain-language overview, not a replacement for your bank's account documents or for advice from your own advisers.

How pass-through coverage works

The FDIC covers this topic in its guidance on pass-through deposit insurance coverage, which cites 12 C.F.R. § 330.5 and 12 C.F.R. § 330.7. Instead of treating the firm as the depositor, the bank can treat each client as the owner, provided the conditions on that page are satisfied.

That distinction matters because the name on an account and the owner of the money are different things. A firm that opens an account for a client usually does so as an agent or fiduciary, which means it holds and moves the money for someone else. The account sits in the firm's name, but the economic owner is the client. Deposit insurance asks a narrower question: who does the bank treat as the owner, and are the conditions for looking through to that owner met? The title on the account alone does not answer that question.

Some state rules for lawyers draw the same line. Pennsylvania's Rule 1.15 sorts client money by who holds it and in what role. In the Pennsylvania Code & Bulletin's words, "Fiduciary Funds are Rule 1.15 Funds which the lawyer holds as a Fiduciary." That rule is written for lawyers, but its approach travels. The role a firm plays with the money shapes how the money is classified, and the account records should show that role.

That is also why the firm's written arrangement with the client and the bank's account-opening documents deserve a close read. The arrangement describes the relationship, and the bank's records describe ownership. Ideally those two sets of records tell the same story.

The point is illustrated with a single owner. In the example's words, "In this scenario, Lisa Johnson is the owner of the funds and her account would be added with any other single accounts she has at AnyTown Bank and insured as her single account for up to $250,000." It counts toward Lisa, the owner, and it is added to her other single accounts at the same bank. Who made the deposit matters less than who owns the money.

The other side of the rule is stated just as directly: "Note that if the pass-through insurance requirements are not satisfied, the deposits will be combined with all other deposits in the broker's name, and insured to the broker for up to $250,000." That sentence is the core of the second case below. The examples use a broker, but the principle applies to fiduciaries generally, so a firm that acts as an agent or fiduciary for clients should read the same pages with its own arrangements in mind.

A related rule covers third-party deposits: "These deposits will then be added to any other deposits the third party may hold in the same ownership category at the same IDI, and the total will be insured for up to $250,000." IDI stands for insured depository institution, the bank or savings association that holds the deposit. The phrase to watch is "same ownership category." Coverage is measured by ownership category at each bank, so opening more accounts at one bank does not, by itself, raise the amount insured in that category.

For more detail on how pass-through coverage works, including accounts that banks open when acting in a fiduciary capacity, the FDIC points readers to FDIC Financial Institution Letter FIL-29-2010, Guidance on Deposit Placement and Collection Activities. Read that letter alongside the employee guide before you set up a new account structure.

Case 1: the requirements are met

Picture a firm that opens a deposit account at a bank on behalf of a client and places that client's money there. The account is titled in the firm's name, but the firm is not the owner of the money. When the pass-through conditions are satisfied, the bank can look past the firm to the client, and the client's share is insured as the client's own.

Take a simple case. Suppose the firm holds a balance for one client that sits comfortably under the $250,000 limit, and that client has no other deposits at the bank. The client's share is within the limit, so the full balance is insured to the client. The firm's name on the account does not reduce that result, because the coverage is measured by the owner.

Now suppose the firm holds money for three clients at the same bank, each with a balance well under the limit, and none of them has other deposits there. Each client's share is measured separately against the $250,000 limit for that client's ownership category. Because each balance falls within its limit, the combined total for the three clients can be fully insured, assuming the conditions are met for every account. This is the practical benefit of pass-through treatment. The firm's total at the bank does not set the limit. Each client's share does.

The benefit depends on the full picture for each client, and that is where operations teams can run into trouble. Suppose the same client who holds a balance through the firm also has a personal account at that bank with a substantial balance of its own. If their combined total exceeds $250,000, the excess is not insured. The firm's records may show two separate items, one held through the firm and one held personally. The coverage question is about the client's total across the single accounts that belong to that client at that bank.

Balances also move. A client's share can rise after a deposit or fall after a withdrawal, so a balance that sits comfortably within the limit in one period can cross it in the next. That is why the check described later in this post should be repeated over time, not done once at account opening.

Comparing the two cases side by side

The table puts the two outcomes next to each other. Its wording follows the language quoted above and the worked examples in this post.

QuestionCase 1: requirements met Case 2: requirements not met
Whose name the coverage is measured underThe client, as the owner The intermediary's name, in the example a broker
Limit statedUp to $250,000 for each client's share, within that client's ownership category at the bank Up to $250,000 in total under the broker's name at the bank
Client's other single accounts at the same bankAdded to them, as in the Lisa Johnson example Combined with the broker-named total, as in the Barry Richards example
Several clients, each with a balance under the limit, at one bank Full combined total insured, assuming the conditions are metCombined total shares one $250,000 limit, so any amount above it is not insured

The table is a summary, not a full set of conditions. The table cannot tell you whether a particular firm's arrangement meets the requirements. That check depends on how each account was opened, how it is titled, and what the bank's records show.

Reading the table alongside the worked examples helps. The middle rows show how the limit follows the owner in one case and the intermediary's name in the other. The last row shows how a total that looks modest on each client's side can still fall above the limit once the shared name is applied.

Case 2: the requirements are not met

Now the other side. Suppose the pass-through conditions are not satisfied for a firm's accounts at one bank. The deposits are then insured to the intermediary, up to $250,000, as set out on the FDIC's pass-through page. In practice, the intermediary's name becomes the unit the limit applies to, and each client's balance stops being measured on its own.

Take the same three clients, each with a balance under the limit at one bank. If the conditions are met, the full combined total is insured. If they are not, the three balances sit together in the firm's name and share one $250,000 limit. Once their combined total passes that limit, the excess is not insured. The gap grows with the balances. If the firm held client balances at that bank that together came to well over the limit, all in its name, the insured amount would still be $250,000, and the rest would sit above the limit.

Clients often assume their money is covered the same way no matter how the account is titled. The difference lies in the title and in whether the conditions are met, and that difference decides how the limit is applied. Explaining it to a client before a problem arises is far easier than explaining it afterward.

The same logic runs across banks. Some firms spread client balances across more than one bank for that reason. That approach has its own costs, such as more accounts to track and more bank relationships to review. Whether it makes sense is a decision for the firm and its advisers, and this post does not recommend it. Moving a client's balance to a different bank changes which limit it counts against, so check the bank and the title before any balance moves.

A client's own accounts also count in this case. The Barry Richards example on the same page makes the point directly: "For example, if a fiduciary, such as a broker, has opened a single account on behalf of Barry Richards in XYZ Bank and Barry Richards directly opens another single account directly with XYZ Bank, both of these deposits are combined and insured for up to $250,000."

Illustrative example: 3 clients at one bank

Suppose a firm holds balances for 3 clients at one bank. Each balance is under $250,000, but together they total more than $250,000. If the pass-through conditions are met, each client is measured against its own limit, so the full combined total can be insured. If they are not met, the three balances sit in the firm's name and share one $250,000 limit, so the amount above that limit is not insured. The same balances can produce different answers, so check the title and the conditions before relying on either result.

Records that tie each balance to its owner

Whatever the bank's specific requirements are, a firm that can show how each balance ties to a client is better placed to answer questions than one that cannot. Without them, a firm has to reconstruct the answer every time someone asks.

For each client, keep a running record of balances held through the firm and of any other accounts that same client holds at the same bank. A client intake checklist can help capture those details when a client is first set up. Update it when balances change, and keep it separate from the bank's own statements so the two can be compared. A firm that does this can see at a glance when a client's total at one bank is approaching the $250,000 limit.

Keep a separate file for each bank rather than one for the whole firm.

Separation is the other half of the record. The Utah Courts rule for lawyers' client funds states: "Funds shall be kept in a separate account maintained in the state where the lawyer's office is situated or elsewhere with the consent of the client or third person." Under the Utah rule quoted above, an account held outside the state where the lawyer's office is situated needs the client's or third person's consent. Other jurisdictions' rules may differ, and that rule does not describe how a bank insures the account.

Reconciliation is worth scheduling on a regular basis. Comparing the firm's record with the bank's statements, or with whatever the bank provides, can catch a balance that has drifted above the limit before anyone else notices. The schedule should match the number of accounts the firm manages, since a firm with many small balances has more to track.

Questions to put to your bank

Before opening a new fiduciary account, or when reviewing an existing one, put these questions to the bank in writing:

  • How does the bank treat an account a firm opens for a client, and which records does it rely on to identify the client as the owner?
  • Which of the client's other accounts at the bank, if any, does the bank count toward the same limit?
  • Are the firm's own deposits at the bank counted separately from client balances, and how does the bank describe that treatment?
  • Which pass-through conditions does the bank expect the firm to meet, and where are they documented?
  • What happens to the coverage treatment if a client closes its own account or changes account type at the same bank?

Written answers matter more than verbal ones. A bank's reply becomes part of the firm's file, and it gives the operations team something concrete to check against the records described above.

Putting the two cases to work

The two cases come down to one question: can the bank look through the firm to the client? When it can, each client's share is measured against that client's own limit, including the client's other single accounts at the bank. When it cannot, the deposits sit in the intermediary's name and share one limit with everything else held there.

Partners should be able to say which case applies to each bank relationship, and operations should be able to show the numbers behind that answer. The FDIC guidance on pass-through coverage is the place to start that conversation. The bank's written answers are the place to finish it.

Clients should hear about this from the firm, not from a bank statement. A short note can explain which account holds their money, whose name it is in, and which limit applies. Keep that note consistent with the bank's written answers, so the firm and the bank describe the same arrangement.

Next step for today: list each client's balances at each bank, add up each client's accounts there, and send the questions above to the bank in writing.

Frequently asked questions

Does one bank account cover every client dollar inside it?

No. Coverage depends on how the account is titled and whether the pass-through conditions are met, so each client's share has to be checked.

Is a client's money insured the same way as money the client deposits directly?

Not always. If the pass-through conditions are not met, the deposits are combined in the intermediary's name and insured to it for up to $250,000.

Sources