Billable client time can be rounded down, rounded up, or rounded to nearest; recorded minutes may differ from billed minutes when rounding applies.
Key takeaways
- Compare the same entries under each rounding method.
- Test exactly 15 minutes before using round to nearest.
- Write down the method, interval, scope, and who may change it.
- Compare rounded reports with raw time before billing.
A single setting can change a month's totals without anyone noticing, so it is worth choosing on purpose rather than accepting whatever a tool does by default.
This post compares three rounding methods: round down, round up, and round to nearest. It uses the examples on Clockify Help: Time rounding as its reference for how each method shows time in one product. Those examples belong to Clockify. They are not a rule for every tool, and they are not a standard for your firm. Before you pick a method for your team, test it in the tool your staff actually use.
Each method gets its own section, with the help page's examples and a short list of questions to answer before you use it. Later sections cover a sample test, a comparison table, a note on cost, and the written policy and client explanation that make the choice hold up. Nothing here replaces the terms you have agreed with each client, so check those first.
Rounding decides which minutes show up in the report
Rounding decides how a recorded stretch of time is displayed and totaled. Clockify's help page describes the effect in terms of what appears in reports, and that is the right place to look when you compare methods. The number your partners review, and the number a client may check against their own notes, is the rounded figure, not the raw timer reading.
A short call, a quick email review, and a longer document session can all land on different totals depending on the method you choose. Reading the three methods side by side, using the same examples, is the fastest way to see the difference.
Round down drops any partial interval
Round down removes the time that does not fill a full interval. On Clockify's help page, the example uses a 30-minute interval, and a 1-29 minute entry shows up in reports as 0 minutes. Source: Clockify Help: Time rounding.
In plain terms, a 29-minute call logged against a 30-minute interval shows as nothing in the report. That can match a firm that has decided to bill only full blocks of time. It also means short pieces of real work can disappear from the totals. A partner who reviews a month of hours will see a gap where the work was done, so the explanation needs to be ready before the question comes up.
That is a judgement for your partners, and the tool does not make it for you. If you are leaning toward round down, ask yourself these questions first:
- How many short tasks does your team log in a typical week?
- Would a client accept a report in which those tasks show no time at all?
- Do the terms you have agreed with each client describe how time is measured and billed?
- Who will answer the question when a client asks why a line shows zero?
Round down also depends on consistent habits. If one staff member logs a short call as its own entry and another folds it into a longer entry, the two records can end up treated differently. Before the method goes live, agree on how staff should log short tasks, and put that agreement in the same written note as the method itself.
Illustrative example: a short call rounded down
A staff member records a 10-minute client call. With round down and a 30-minute interval, the report shows 0 minutes. The timer still records the work, but the rounded report does not include those minutes in its total. Before using this method, decide whether that result matches the firm's client terms and written policy.
Round up turns a short entry into a full interval
Round up is the reverse of round down. Using the same 30-minute interval, Clockify's help page says a 1-29 minute entry shows up in reports as 30 minutes. Source: Clockify Help: Time rounding.
Under round up, a short file check, a quick email reply, or a brief phone call each becomes a half hour in the report. Across a week of short tasks, the report can show more time than staff recorded on the clock. That gap is worth explaining in the policy before anyone sees it.
The rule is easy to state in one sentence, which helps when staff need to apply it the same way. The difficulty comes later, when a client checks a report line by line and asks why a short entry shows as a half hour. A clear answer for that moment is part of the method. Write down how the firm will explain round up, with one example, before the first report goes out.
Round up also raises a question about fairness that the firm has to answer for itself. That question belongs to the terms you have agreed with each client, and it should be settled before you use the method on live work.
Round to nearest sends each entry to the closer mark
Round to nearest decides each entry by where it falls. The help page's example uses the same 30-minute interval: a 1-14 minute entry shows up in reports as 0 minutes, and a 16-29 minute entry shows up as 30 minutes. Source: Clockify Help: Time rounding.
This method makes the result sensitive to small differences. A 14-minute entry shows as 0 minutes, while a 16-minute entry shows as 30 minutes. Two entries that differ by only two minutes can show a difference of 30 minutes in the report. A partner who sees that gap for the first time may want to know why, so be ready to walk through it with a real example from your own files.
Here is how that plays out across a day. A staff member logs three calls of 14, 16, and 29 minutes. Under round to nearest, using the help page's ranges, the 14-minute call shows as 0 minutes and the other two show as 30 minutes each. The raw time adds up to just under an hour, yet the report shows a full hour. The difference is small in this case, but it comes from the boundary, not from the total effort.
Test an entry of exactly 15 minutes in your own settings before you rely on this method for entries of that length. A test takes little effort compared with correcting a report after a client has already seen it.
Some readers may see round to nearest as the most balanced of the three, since each entry moves to the nearer mark. Your partners should decide whether it fits your practice, and they should be able to say why in one or two sentences.
Because the result changes at a boundary, staff who round entries by hand may reach different answers from one another. If staff are expected to do any rounding themselves, the policy should include a worked example for the boundary cases.
Minute-level rounding shows 00:10:56 as 00:11:00
Minute-level rounding rounds a duration containing seconds to a one-minute interval. The help page says that if you set the rounding to the nearest minute, your 00:10:56 time entry will be displayed as 00:11:00 once you turn the rounding on. Source: Clockify Help: Time rounding.
The same page gives a second example: "For example, if you tracked 0 hours, 1 minute, and 15 seconds (00:01:15), the entry will be shown as 0 hours and 2 minutes (00:02)." Source: Clockify Help: Time rounding.
Changes at this level are small compared with the 30-minute examples above. Each adjustment is easy to overlook one at a time, but across many entries in a month the differences can add up to a visible change in the total.
Minute-level rounding is also a good test of whether your staff's timers match the way the firm wants time shown. If the timers record seconds, decide how you want seconds handled and write that down. Staff who start and stop timers in different ways may produce records that look alike but total differently.
Is time rounding free in Clockify?
No. The help page says time rounding is a paid feature, which you can enable by upgrading your workspace to a Standard, Pro, or Enterprise paid plan. Source: Clockify Help: Time rounding.
Add this to the cost check when you compare tools. Rounding may matter to your process even if the rest of a tool fits your team, so confirm which plan you need before you build your process around a rounding method. Ask the vendor directly if the plan pages do not answer the question for your situation.
If your partners have already picked a plan, check that it includes the rounding feature before you write the policy. A policy that describes a setting the firm cannot use when staff need it will cause confusion later.
Compare the methods with the same sample entries
Compare the methods by running the same sample entries through each one and reading the results side by side. Use the values the help page uses, 1, 14, 16, and 29 minutes, because they sit at the edges of the example ranges. Then add a few entries from your real work.
Here is a short test you can run:
- Set the interval to 30 minutes in a test workspace, since that is the interval the help page uses.
- Apply one method at a time, and enter the four sample values.
- Record the result each method shows in the report.
- Repeat the test with one week of real entries from your team.
- Compare the totals with the time staff actually recorded.
The table below shows the results for the four sample values. Each cell follows the help page's ranges for a 30-minute interval. Source: Clockify Help: Time rounding.
| Entry length | Round down | Round up | Round to nearest |
|---|---|---|---|
| 1 minute | 0 minutes | 30 minutes | 0 minutes |
| 14 minutes | 0 minutes | 30 minutes | 0 minutes |
| 16 minutes | 0 minutes | 30 minutes | 30 minutes |
| 29 minutes | 0 minutes | 30 minutes | 30 minutes |
Ask someone who did not set up the test to check the results. A second reader catches mistakes in the test itself, such as a setting left on from an earlier step. Keep the test records as well. When someone asks later why the firm chose a method, a short record answers the question better than memory does. For related record checks, see workpaper recovery checks.
Where to start
Today, run the four-value test on a 30-minute interval and save the report beside the raw entries. Compare the results before choosing a method for client billing.
Should the firm write down its rounding policy?
Yes, write down the rounding policy so the firm can explain and check it. Without one, the method can live in one person's head, and the report becomes harder to defend when that person is not available.
A short policy should cover four things: the method, the interval, which entries it applies to, and who may change it. Keep it to about one page so it stays readable. Review it when the firm changes plans, intervals, or the way staff log their work. For example, a policy might read: "Round to nearest, using a 30-minute interval, applied to all billable entries, changed only by the managing partner." That illustrates the format. It is not a recommendation of any method.
Which entries the policy applies to matters more than it first appears. A policy that covers every entry is simpler to follow than one that treats calls, document work, and research differently. A simple policy may not match every kind of work your firm does, so decide that trade-off on purpose and write the reason beside it.
The policy is also the document you need when a client asks why a report differs from their own notes. Pointing to a written method is clearer than explaining the rounding from memory, and it gives the client something specific to check.
How should you explain rounding to clients?
Explain it in plain words, in writing, before the first bill goes out. Give the client the method, the interval, and one example from your policy. Say that the report shows rounded time, so a client comparing it with their own notes understands the difference. Add that explanation to your client intake checklist.
Keep the wording plain. Avoid jargon such as "interval" without a definition, and show the example in minutes rather than in terms of settings the client cannot see. A client who reads a 14-minute entry shown as 0 minutes, and understands why, is in a better position than one who has only been told that rounding is applied.
If your firm chooses round to nearest, you might adapt wording like this: "Our time is recorded in minutes. Each entry is rounded to the nearest 30-minute mark, so a report may show more or less time than the timer recorded." Adjust the wording to match the method your partners actually choose, and check it against the policy before you send it.
Should you check the reports after each billing cycle?
Yes, compare the reports with the raw time your staff recorded after each billing cycle. This is the step where problems can be found before the bill goes out.
Look first for entries that show zero time, since round down can remove them from the totals. Then look for entries that jumped up, since round up can enlarge them. These are the lines that will attract questions, so review them before the report goes to a partner.
Review a sample of entries by hand and compare each one with the raw timer value. If the rounded value does not match the method in your policy, find out why before you bill. A mismatch may come from a setting that differs between staff, or from an entry logged in a different way than the policy expects. Record what you found, and update the policy when a case shows that the written rule was unclear.
Related guides: Bank feed checks: 8 items for client reconciliation · Bank reconciliation: 8 checks before client sign-off.