Why the filing date sets the cap
Log the cap from the filing date: Florida's limit is $15,000, $30,000, or $50,000, decided by when the case was filed.
If your team logs unpaid-fee claims at intake, one field does more work than the others: the date the case was filed. Florida's jurisdictional limit is set by that date. The Florida Statutes, Chapter 34, Section 01 sets three amounts, $15,000, $30,000, and $50,000, and the filing date decides which one applies. The invoice date and the date the work was performed are not the test in this statute text.
Key Takeaways
- Log the filing date first; it, and only it, sets the cap.
- Three amounts apply: $15,000, $30,000, and $50,000, each keyed to a filing period.
- Store the bracket label alongside the limit so the reason stays visible.
- Set two shared-calendar reminders for January 31, 2030 and July 1, 2030.
That is why a cap cannot be treated as one fixed number. Two claims for the same dollar amount, filed in different years, can be measured against different limits. A claim filed in late 2019 falls under the first amount, and a claim filed in 2020 falls under the second. If your intake form asks someone to type a single "cap" value by hand, it will be wrong for some files. The value should come from the filing date every time.
Filing-date rules are not universal, though. Other states tie related questions to filing dates, but the subject and the wording change from state to state. Michigan has a rule about interest that reads: "However, for complaints filed on or after October 1, 1986, interest is not allowed on future damages from the date of filing the complaint to the date of entry of the judgment." That sentence governs interest on future damages, not a claim cap, and it applies only in Michigan. The lesson for intake is not to borrow the Florida brackets for a file filed somewhere else. Find the statute for the state where the case was filed, and log the rule that applies there.
The practical job at intake is simple to state. Capture the filing date accurately, assign the right bracket, and record both the bracket and the limit so the next person can check the work. The sections below explain the brackets, how to lay them out in a lookup table, how to handle the scheduled 2030 review, how to train new staff, and where intake logs usually go wrong.
The three amounts
The statute keys each amount to a filing period, and the periods run in sequence. To keep the rest of this post readable, I will give each period a label.
- Bracket A: filed on or before December 31, 2019. Limit: $15,000.
- Bracket B: filed from January 1, 2020 through the day before January 1, 2023. Limit: $30,000.
- Bracket C: filed on or after January 1, 2023. Limit: $50,000.
These are the amounts as written in the statute. Bracket A has only an end date. Brackets B and C each begin on a stated date and stay in effect until the next bracket begins. Bracket A ends on December 31, 2019, and Bracket B starts on January 1, 2020. Bracket B gives way to Bracket C on January 1, 2023. Read together, the middle bracket covers the whole stretch between those two starting points.
Boundary days are where errors happen, so it helps to walk through them. A filing made on December 31, 2019 belongs to Bracket A, and a filing made the next day belongs to Bracket B. The last day of Bracket B is the one just before Bracket C starts. A filing made on January 1, 2023 belongs to Bracket C. A file that is off by one day can carry the wrong limit into your records, so boundary dates deserve a second look.
A useful way to hold this in mind is to think of the brackets as a timeline rather than as three separate amounts. The statute's wording for Bracket A names a last day, while the wording for Brackets B and C names first days. Your log should reflect that same structure, with a start or an end recorded for every row.
| Filing period | Bracket | Limit | What comes next |
|---|---|---|---|
| Through December 31, 2019 | A | $15,000 | Bracket B begins January 1, 2020 |
| January 1, 2020 until Bracket C begins | B | $30,000 | Bracket C begins January 1, 2023 |
| January 1, 2023 onward | C | $50,000 | Scheduled adjustment takes effect July 1, 2030 |
Each row is a range, and every filing date belongs to exactly one row. The last column for Bracket C is not a new bracket. It marks the date after which the $50,000 figure is scheduled to be adjusted, as explained in the 2030 section below. Until that adjustment takes effect, $50,000 is the figure the quoted text supports for Bracket C filings.
Build a lookup table for intake
The simplest way to avoid typing errors is to store the brackets in one lookup table and let the intake form read from it. A spreadsheet tab or a small reference table in your case system works well.
| Bracket | Start date | End date | Limit | Note |
|---|---|---|---|---|
| A | Not needed | December 31, 2019 | $15,000 | Earliest filings |
| B | January 1, 2020 | The day before Bracket C's start | $30,000 | Middle period |
| C | January 1, 2023 | Left open | $50,000 | Adjustment scheduled; see the 2030 section |
Each bracket needs a start date and an end date, except Bracket A, which has no start date, and Bracket C, whose end date stays open. The statute does not set a closing date for Bracket C. It schedules an adjustment, so a note in the row is more accurate than an invented end date. Add a short note beside it pointing to the July 1, 2030 adjustment date and to the statute, so a reviewer knows why the row is still open.
Keep the bracket labels short and stable. Letters like "A," "B," and "C" are easy to pick from a drop-down, and they do not change when someone edits a date range. If your system allows it, have the limit fill in automatically once the bracket is chosen. Staff should not retype the number, because retyping is where small errors creep in. The bracket label should stay visible in the record, so anyone reviewing the file can follow the logic without redoing the date math.
Decide in advance who owns the lookup table. If the form and the table ever disagree, someone needs to check the statute and fix whichever one is wrong. Write that rule down. Without it, two people can each assume the other one checked, and the disagreement sits in the records for months.
Logging steps at intake
These steps apply each time a claim is opened:
- Make the filing date a required field. If the case has not been filed yet, mark the record as pending and do not assign a cap. Come back to it once a filing date exists.
- Enter every date in one format. Mixed formats, especially day-first and month-first entries, are a common source of wrong brackets. A date like 03/04/2020 can be read two ways, and only one of those readings matches the actual filing date.
- Assign the bracket from the filing date. Do not assign it from the amount claimed, the invoice date, or the date of the underlying work.
- Record both the bracket label and the limit. The label shows the reason, and the limit lets a reviewer compare quickly.
- Store the source and the date you checked it. The statute linked in the first section is the source for these brackets, and the review date tells the next person how current your check was.
- If the filing date is corrected later, run the bracket check again. Keep a note of the old and new dates and the old and new brackets. Do not simply overwrite the first entry.
- Flag any file whose filing date falls on or next to a boundary: December 31, 2019, January 1, 2020, Bracket B's last day, or January 1, 2023. Have a second person confirm the bracket for those files before the record is closed.
Reviewing the 2030 adjustment
The $50,000 figure is not described in the quoted text as permanent. The statute schedules a change, and intake staff should know what that change does and does not do. According to the Florida Statutes, Chapter 34, Section 01, the $50,000 jurisdictional limit "must be adjusted and increased by the percentage change in the Consumer Price Index for All Urban Consumers, U.S." effective July 1, 2030, and every 10 years after that.
The same section sets three limits on how that adjustment works. First, the adjusted jurisdictional limit must be rounded to the nearest $5,000. Second, the jurisdictional limit may not be lower than $50,000. The adjustment can keep the figure at $50,000 or raise it, but it cannot push it below that amount, even if the price index moves in a direction that would otherwise lower it. Third, the Office of Economic and Demographic Research must calculate the adjusted limit and certify it to the Chief Justice of the Supreme Court, beginning January 31, 2030, and every 10 years after that.
What this means at intake is straightforward. The adjusted figure cannot be known from the text alone. It depends on a calculation and a certification that come before the effective date. Until an official adjusted figure is available from a source you can cite, keep the cap at the bracket amount. Do not estimate the new number with an inflation calculator or a rough guess. An estimate in a case record looks like a fact to the next reader, and it can be wrong from the rounding rule alone.
Set two calendar reminders now. The first, for January 31, 2030, is a prompt to check whether the certification has been issued. The second, for July 1, 2030, is a prompt to confirm the adjustment's effective date and update the lookup table. Put the reminders on a shared calendar, not on one person's calendar, so the work does not depend on a single staff member remembering it.
Train new intake staff with worked examples
New staff often learn the brackets as a list of numbers and then apply the number first and the date second. The safer habit is the reverse: read the filing date, find the bracket, then read the limit. A few worked examples help build that habit.
Worked example: boundary dates
Now take the boundary cases. A file filed on December 31, 2019 is Bracket A, and a file filed the next day is Bracket B. The final day of Bracket B is the one just before Bracket C opens, and a file filed on January 1, 2023 is Bracket C. Have new staff write these boundary dates on a card and check each one against the lookup table until they can do it without looking.
Give new staff a clear rule for when to stop and ask. If a filing date is missing or unclear, or if it falls on a boundary and the second check disagrees with the first, the file goes to a supervisor. Staff should not pick the answer that seems more likely. That habit is the most useful thing a training session can build, because most logging errors come from guessing at an edge case rather than from misreading a rule.
For a related checklist, see Accounting Client Intake Checklist for a Clear Handoff.
Audit the log on a schedule
Even a careful intake process drifts over time. A simple audit keeps it honest. Once a month, pull a sample of entries, perhaps ten or twenty, and check each one against the rules in this post. For each entry, confirm that the filing date is present and in the standard format, that the bracket matches the date, that the limit matches the bracket, and that the source and review date are stored.
Give extra attention to boundary files. Any entry on one of the boundary dates listed in the logging steps should be checked every time, not only when the sample happens to include one. Those are the entries where a single misread digit or a time-zone shift in a system timestamp can change the bracket.
Record the results of each audit in a short note: how many entries were checked, how many were wrong, what kind of error it was, and what was changed. A pattern of the same error is a signal that the form or the training needs work. A single error is usually a reason to fix one record and move on.
Common intake mistakes
Most errors in this area come from a few habits. The first is using the incident date, the invoice date, or a rule from another state instead of the Florida filing date. The statute text in the Florida Statutes, Chapter 34, Section 01 is keyed to when a case is filed, so the other dates in a file are not the right input for the bracket.
The second is applying $50,000 to every claim because it is the newest figure. That figure belongs to Bracket C. Using it for earlier filings overstates the limit the statute sets for them.
The third is treating 2020 as a one-year bracket. Bracket B runs from January 1, 2020 until Bracket C begins, which is a much longer stretch. Staff who think it ends at the end of 2020 will mislabel filings made in the years after that.
The fourth is recording a limit with no bracket label. A bare number hides the reason, and when the statute changes or a date is corrected, nobody can tell which records were built on which rule. The label is cheap to store and expensive to reconstruct later.
The fifth is overwriting history. When a filing date is corrected, keep the old value and the new value, with a note about why the change was made. A record that shows its own history is much easier to audit than one that shows only the final answer.
The last mistake is confusing a cap with an outcome. The bracket tells the team which limit applies to a file. It does not decide whether a claim will succeed, how it will be resolved, or what any party is owed. Those questions belong to the people responsible for the case, and the intake log should not record them as if the cap had answered them.
Your next step today
Open your intake form and make the filing date a required field, then store the three brackets as a lookup table so the limit fills in from the date rather than from memory.
Related guides: Bad debt claims: 3 deadline checks before filing · Colorado small claims: 3 steps for an unpaid fee · Florida sales tax filing frequency: 4 thresholds.
Questions intake teams ask
Which Florida cap applies to my file? The filing date decides: on or before December 31, 2019 the cap is $15,000; from January 1, 2020 it is $30,000; from January 1, 2023 it is $50,000.
Does the invoice date or work date set the cap? No. The statute keys the amount to the date the case was filed, so invoice dates and work dates are not the test.
What changes on July 1, 2030? The $50,000 limit is scheduled to be adjusted for price-index change, rounded to the nearest $5,000 and never pushed below $50,000; keep the current bracket amount until an official figure is certified.
Should I estimate the 2030 figure? No. Keep the cap at the bracket amount until an official adjusted figure is available from a source you can cite.
What if the filing date is missing? Mark the record pending, do not assign a cap, and return to it once a filing date exists.
Checklist before you save the record
Before a claim record is saved, run through this short list:
- The filing date is entered, and it is in the standard format.
- The bracket label matches the filing date, and any boundary date has had a second check.
- The limit was filled in from the lookup table, not typed by hand.
- The source link and the date of your review are stored with the record.
- Any correction to the filing date has a note showing the old and new values.
- The 2030 reminders are on the shared calendar, and the lookup table carries the open-ended note for Bracket C.
This post explains the Florida statute text as quoted here. It is a guide for intake logging and is not legal advice. For a particular file, confirm the bracket and any questions about how the case should be handled with the attorney or other person responsible for it.