Skip ahead to the main page
Partner Huddle
Pages

Sales tax invoices: 3 checks before client billing

Partner Huddle Editorial Team · Published · 10 min read

Before billing, check sales tax presentation under the applicable state's rules, recalculate tax-included prices, and document the reason for any tax-free sale.

Key takeaways

  • Confirm which state's invoice requirements apply before reviewing the tax line.
  • Check tax-included prices using an independently confirmed rate.
  • Find the paperwork behind tax-free sales and record unresolved questions.

Once the bill reaches the customer, changing it means a correction, a conversation, and sometimes an amended record. For a business that collects sales tax, the invoice is also where the customer sees what they were charged, including the tax, and where a reviewer can check whether the tax was handled correctly.

Partners and operations leads who review these invoices do not need to be sales tax specialists to run a useful first pass. This post walks through three checks. Each one is a question you can put to the invoice before it goes out. None of them replaces the client's own tax advisor, and none of them settles the rules for a state you have not looked up. Sales tax rules are set state by state, so the first step in any review is to confirm which state's rules apply to the sale. The rules quoted below come from two states, Washington and California, and each applies only in the state named.

The three checks build on each other. The first looks at how the tax appears on the page. The second looks at how a tax-included price was split into a price and a tax. The third looks at why a sale carries no tax at all. If the first check fails, fix it before moving on, because the later checks depend on the same numbers.

Read each check with the client's invoice open beside you. Look at the actual line items, totals, and tax amounts rather than a summary of what was billed. Write down what you found, even when everything is in order. A short written record is useful if a question comes up after the invoice has gone out. Use a client intake checklist to organize the handoff.

Decide in advance who may release an invoice that still has an open question. If that person is not you, make sure they know which check failed and why.

Check 1: Sales tax is listed on its own line

The Washington State Department of Revenue requires Washington sellers to list retail sales tax separately from the selling price on invoices and other contracts of sale.

A reviewer should not assume a document falls outside the rule because it has a different name. If a Washington client uses a written contract of sale, the same question applies: is the retail sales tax shown apart from the selling price?

Start by finding the selling price and the tax on the document. Read it from top to bottom, the way the customer will. If the tax is folded into the item price and there is no tax line at all, the document does not show the separate listing that Washington's rule describes. Flag it for correction before it is sent. Do not fix it by quietly changing the item price, because the price the customer agreed to may need to stay as it is, with the tax shown beside it.

The same page makes clear that the separate listing applies even when the parties agree otherwise. It says: "This is required even when the seller and the buyer agree that the advertised price includes retail sales tax."

Run this check with five questions:

  • Does the document show a subtotal, a tax line, and a total?
  • Does the tax line show a rate, an amount, or both, so you can recompute it?
  • Does the total equal the subtotal plus the tax?
  • Does the tax amount match the items the client says were taxed?
  • Is the tax labeled clearly, so a customer can tell what they are paying?

If the tax line is present but the total does not add up, the problem is in the arithmetic. Recompute the subtotal from the line items, then the tax from the rate, then the total. A line item edited after the tax was calculated can cause a total to drift, so compare the invoice against the version the client approved. If that version is missing, follow the workpaper recovery checks.

These questions check layout and arithmetic. They do not tell you whether an item is taxable in the client's state. That belongs to the client's tax advisor or the official guidance of the state where the sale happens. A client that sells into several states should have this check run against each state's own requirements, not the Washington rule quoted here.

Keep the result on file: the document number, the date, the names on the document, and whether the tax line was present and correct. If the tax line was missing, record what was changed and who approved the change.

Check 2: Tax-included prices can be backed out

The Washington State Department of Revenue describes the method: "To 'back out' the sales tax amount from the advertised price, you would simply divide the total price (which includes the sales tax) by 1 plus the sales tax rate." ( Washington State Department of Revenue)

The same page explains how Washington sellers may advertise. It says: "Washington sellers can advertise that sales tax is included in the price of their goods, or that the seller is paying the sales tax."

The page works through an example. It says: "XYZ has shoes that are being advertised as $100.00 tax included." Using the 8.9% rate in that example (0.089), the page shows the amount before tax as $91.83, with retail sales tax of $8.17 on top. The two amounts add back to the advertised $100.00. The example also covers a retailing business and occupation (B&O) tax, which is a separate Washington tax this post does not cover. For an invoice review, the useful part is the method: start from the total, divide out the tax, and compare the result with the invoice.

Why work from the advertised price? Because it is the fixed point. The customer saw that number, and the review checks whether the invoice reflects it. Working backward from an invoice total and adjusting the rate until the numbers look right reverses the logic. Confirm the applicable tax rate independently, then use that rate and the fixed tax-included price to calculate the split.

Here is how to apply the method to a client invoice:

  1. Find the advertised or quoted price the customer was told included tax.
  2. Confirm the rate that applies to the sale, not a rate remembered from another client or state.
  3. Divide the tax-included price by one plus the rate. This gives the amount before tax.
  4. Subtract that amount from the tax-included price. This gives the tax that should be shown.
  5. Compare the results with the pre-tax amount and the tax line on the invoice.

Illustrative example: Check the split

For an illustrative tax-included total of $11 and a hypothetical 10% rate, divide $11 by one plus 10% to get $10 before tax. Subtract $10 from $11 to get $1 in tax. Check that the invoice's selling price and tax add back to $11. This hypothetical rate is for arithmetic practice only.

If the numbers do not match, check the rate first, then the price, then the tax line. Rounding can cause small differences, so decide in advance how much difference you will accept and write that threshold into your notes. A large difference is a question for the client.

Watch for one pattern in particular. If an invoice shows the advertised price as the amount before tax and then adds tax on top, the total no longer matches the price the customer was shown. The customer was shown one number, and the invoice charges another. Send that invoice back before it goes out. The total should match what was advertised or quoted, and the invoice should show how the tax was calculated. If the client changed the price structure after the advertising ran, ask for the reason in writing and keep it in the file.

Record the calculation so that a reviewer can find the rate, the pre-tax amount, and the tax amount on the document or in the notes attached to it.

Check 3: Match tax-free sales to a resale certificate

The California Department of Tax and Fee Administration states this in its publication on sales for resale: "When a seller accepts a valid resale certificate in good faith and in a timely manner, the seller does not owe tax on that sale." ( California Department of Tax and Fee Administration)

The same publication describes who issues the certificate: "CDTFA-230, General Resale Certificate, can be issued by purchasers when purchasing goods they will resell in the regular course of their business operations."

A sale with no tax line is not automatically an error. But the review has to find the reason. A tax-free sale with no documented reason is the thing to question.

For each invoice that shows no sales tax, ask:

  • Is the buyer reselling the goods on the invoice, or is the buyer the final user?
  • If the sale is a resale, what document did the seller accept from the buyer?
  • Is that certificate the one the buyer issued for this purchase?
  • Was it accepted in a timely manner, as the publication describes?
  • Was the seller's acceptance made in good faith?

Do not decide on your own that a certificate is valid when you are unsure. Ask the client to show the certificate it accepted, and take the question to the client's tax advisor if the document looks incomplete or the buyer's business does not fit the resale purpose on the certificate.

Also check the buyer against the invoice. If the certificate names one business and the invoice is billed to a different business or location, note the mismatch and resolve it before release. You are checking that the paperwork and the invoice tell the same story, not second-guessing the buyer's business.

If the client says a certificate exists but cannot find it, treat the sale as unresolved. The other two checks can still move forward, but the tax-free sale should not be released as settled until the paperwork is in the file. Write this rule down in advance so the preparer is not deciding it under deadline pressure.

This publication applies to sales in California. For sales in another state, use that state's own forms and resale rules from its official site.

Finally, write down the date the certificate was accepted and the date of the sale, so the order of events is clear.

Close the review before the invoice goes out

Run all three checks, in order, before any invoice is released. For taxable Washington sales covered by the quoted rule, confirm a separate sales tax listing; elsewhere, confirm the applicable invoice requirements. Recalculate any tax-included price using the rate that applies to the sale. Match each tax-free sale to a documented reason, such as a resale certificate the seller accepted.

A short list of questions for the client makes the review faster: which state each sale took place in, whether any price was advertised as including tax and at what amount, every resale certificate behind a tax-free sale, and who approved any price change made after the advertising ran.

If an invoice fails a check, send it back to the preparer with the specific line and reason. "Tax looks wrong" is not enough. "The tax line is missing, and the price is advertised as tax included, so the tax needs to be backed out and shown separately" gives the preparer something to fix.

Record the outcome for each invoice: the invoice number, the three checks, the result of each, and the name of the person who released it. If a later question comes up about how a tax amount was calculated or why a sale carried no tax, the record shows what was checked and who approved it.

Be clear with the client about scope. These checks cover the layout of the invoice, the arithmetic behind tax-included prices, and the paperwork behind tax-free sales. They do not decide what is taxable, which rate applies to a new kind of sale, or whether a buyer qualifies for tax-free treatment. Those belong to the client's tax advisor and the official guidance of the state where the sale takes place. A review that follows these steps will not catch every tax problem, but it will catch errors visible on the invoice, in the math, and in the paperwork, and it will leave a written record that lets the next reviewer pick up the file.

Today, open an unsent invoice, run the checks that apply, and write down any question the preparer must resolve before release.

Questions before billing

Can these checks confirm whether an item is taxable?

No, these checks cover invoice layout, arithmetic, and supporting paperwork. Take questions about taxability to the client's tax advisor or the applicable state's official guidance.

What should happen when a certificate cannot be found?

Treat the sale as unresolved. Record the missing paperwork and the question that must be resolved before release.

Sources