Skip ahead to the main page
Partner Huddle
Pages

3 landlord rule lines: 10 properties, 4 units, parks

Partner Huddle Editorial Team · Published · 12 min read

Partners and operations leads at small firms often open a landlord client file and face the same first question: which rules apply to this landlord, this property, and this state? The answer is not always the same rule set. Some laws carve out owners with a small number of properties. Some draw a line at four units. Some exclude a whole category of housing from a section. If you check those lines first, the rest of the file gets easier to read.

This post looks at three lines that show up in state landlord-tenant material: a ten-property line in Georgia, a four-unit late-fee tier in Texas, and a manufactured home park carve-out in Minnesota. It also covers two precedence rules from Washington and Maryland, which answer the harder question of what happens when two rules point in different directions. Everything specific below comes from the official pages or resource guides linked in the text. Where a source does not say something, this post does not say it either.

Start with who the landlord is

Before you sort a file into a rule set, pin down who the landlord is. In small firms the owner, the managing company, and the person who signs leases are often different entities. A rule written for "the landlord" may or may not reach the people in your file, so that is the first thing to settle.

StateProvisionWhat it requiresSource
MinnesotaSection 504B.211"Landlord" includes the landlord's agent or person acting under direction and control state revisor page
WashingtonRCW 59.18.060 (16) Designate name and address of the landlord on rental agreement or posted noticeRCW 59.18.060
GeorgiaExemption note10 or fewer properties, unless under property management Rentec Direct

The Minnesota statute is useful on this point. The statute in section 504B.211 says that, for purposes of that section, "landlord" has the meaning defined in section 504B.001, subdivision 7, "and also includes the landlord's agent or other person acting under the landlord's direction and control." Section 504B.211 on the state revisor's site If your firm acts for an owner, the file should show who you act for and what authority you have. Otherwise you cannot tell whether that section's duties reach your firm as well as the owner.

Pay attention to files where the owner signs the lease but a management company collects rent or handles repairs. The file should say which entity holds each role. A single answer to "who is the landlord?" may not fit every duty in the file, and the exemption tests in the sections below look at different facts for different entities.

Washington's statute takes a related approach from the tenant's side. One of the landlord duties it lists is to "Designate to the tenant the name and address of the person who is the landlord by a statement on the rental agreement or by a notice conspicuously posted on the premises." RCW 59.18.060 That is subsection (16). In a file review, look for that designation. If the name on the lease and the name in your system differ, resolve the difference before you apply any exemption, because every test that follows depends on who the landlord is.

Count properties first

Georgia's guide puts the clearest exemption line on the page. Its exemption note reads: "If a landlord owns 10 or fewer properties, different laws apply to him regarding escrow accounts, move-in/move-out inspection paperwork, and failure to comply, unless the properties are under property management." Rentec Direct, Georgia Landlord-Tenant Laws Resource Guide

The quote gives three things you can use directly. It names the trigger, which is the number of properties a landlord owns. It names the topics where different laws apply: escrow accounts, move-in and move-out inspection paperwork, and failure to comply. And it names a carve-out: the exemption does not hold where the properties are under property management.

That carve-out matters most for firms. A company that manages properties for owners should not assume the ten-property line helps the owner or the firm. The quote says the line does not apply where the properties are under property management, so the file needs to show who manages each property. Three checks follow from the quote:

  • Count the properties the landlord owns and write the number in the file. The quote says "10 or fewer," so ten qualifies and eleven does not.
  • Record whether any of those properties are under property management.
  • Note which of the three named topics the file touches, so you know which other laws to pull.

The quote does not say what the "different laws" are. Do not fill that gap from memory. Look them up in the Georgia law, and mark them in the file as to be confirmed until someone has read them.

Count units on each property

Texas works differently. Its late-fee line is not labeled as an exemption, but it sorts properties by unit count and sets a different figure on each side of the line. The Texas guide says: "Late Fees: Landlords in Texas can charge between 10-12% depending on how many units are on the property (4 or less at 12%, more than 4 at 10%)." Rentec Direct, Texas Landlord-Tenant Laws Resource Guide

Units on the propertyLate-fee figure in guide Sorting basisSource
4 or fewer12%Units on that property Rentec Direct
More than 410%Units on that property Rentec Direct
Any countRange of 10-12% Each property counted on its own, not portfolio totalRentec Direct

The cutoff is at four. A property with four or fewer units falls under the 12% figure in the guide. A property with more than four units falls under 10%. The guide ties the count to "the property," so count units on each property, not across the whole portfolio. A firm that holds several small buildings should not add their units together and sort the total.

Do not copy the rate into a client letter based on this post alone. The source is a resource guide, not the statute, and the sources checked for this post do not cite a statute section for the late fee. Find the Texas text before you rely on the rate.

Here is how the three lines compare, using only the facts the sources give:

LineWho or what it coversRule the source givesSource
10 or fewer properties (Georgia) A landlord who owns 10 or fewer properties, unless the properties are under property management Different laws apply for escrow accounts, move-in/move-out inspection paperwork, and failure to comply Rentec Direct
4 or fewer units (Texas)Units on the property Late fee at 12% for 4 or fewer units; 10% for more than 4Rentec Direct
Manufactured home parks (Minnesota)Residential tenants and landlords of manufactured home parks as defined in section 327C.015Section 504B.211 does not apply state revisor page

Check whether the property is a manufactured home park

The Minnesota carve-out is written into the section itself. The text reads: "This section does not apply to residential tenants and landlords of manufactured home parks as defined in section 327C.015." Section 504B.211 on the state revisor's site

Two points follow. First, the exclusion is for this section. The quote does not say that other parts of Minnesota law stop applying to a manufactured home park, so do not read it as a general exemption from everything. Second, the exclusion turns on a definition. The statute points to section 327C.015 for what counts as a manufactured home park. That definition is not quoted in the sources checked for this post, so the file should record the definition and the facts that meet it, rather than a label from the owner's paperwork.

For a file review, ask three questions. Does the property meet the definition in section 327C.015? Is the section cited in the file the one with the carve-out? Are the tenants residential tenants of that park? If the answer to the first question is yes, that section does not apply, and you should check the other sections separately.

When two rules conflict

Exemption lines answer whether a rule applies at all. Precedence rules answer which rule wins when two of them do. Two of the checked sources speak to that directly.

StateConflict addressedPrecedence rule as written Source
WashingtonDuty in subsection (1) alongside other duties in the section Subsection (1) governs when incompatible with and greater than another dutyRCW 59.18.060
MarylandState section 8-208.1 alongside a comparable county ordinance Section supersedes a county ordinance comparable in subject matter, to the extent the ordinance provides less protection to a tenant Maryland General Assembly

Washington's landlord-duties statute contains a precedence sentence: "When the duty imposed by subsection (1) of this section is incompatible with and greater than the duty imposed by any other provisions of this section, the landlord's duty shall be determined pursuant to subsection (1) of this section." RCW 59.18.060 Read carefully, this covers a conflict inside the same section. Where the subsection (1) duty is both incompatible with and greater than another duty in that section, subsection (1) sets the landlord's duty. Both tests must hold. Ordinary overlap between two duties does not trigger the rule. The quote does not say what subsection (1) requires, so read it in the statute before you apply the sentence.

Maryland's section 8-208.1 handles a different conflict, between state law and local law. Its subsection (g) reads: "If any county has enacted or enacts an ordinance comparable in subject matter to this section, this section shall supersede the provisions of the ordinance to the extent that the ordinance provides less protection to a tenant." Maryland General Assembly, Laws - Statute Text So a county ordinance on a comparable subject gives way to the state section to the extent it gives tenants less protection. The quote does not address an ordinance that gives tenants more protection, so treat that case as a separate question to check in the county text.

For a client file in either state, the lesson is the same. Do not stop at the first rule you find. Identify whether a second rule covers the same subject, then read the precedence text before deciding which one drives the file.

In the file note, write the rule you found, the text that governs it, the state and county, and the reason one rule was chosen over another. A note in that form lets a reviewer check the decision without reconstructing your search.

A working order for each file

Use this order when a file arrives. It is a working sequence drawn from the sources above, not legal advice, and it does not replace reading the statute.

  1. Identify the landlord, and any agent acting under the landlord's direction and control.
  2. If the property is in Minnesota, check whether it is a manufactured home park under the definition in section 327C.015. If it is, check the Minnesota section's carve-out before you go further with that section.
  3. If the property is in Georgia, count the properties the landlord owns and note any that are under property management. The ten-property line applies at ten or fewer owned properties, unless property management applies.
  4. If the property is in Texas, count units on that property. The late-fee line sorts at four units.
  5. Confirm the state, and any county rules on the same subject.
  6. If two rules apply, read the precedence text. Washington's subsection (1) duty controls only where it is incompatible with and greater than another duty in the section. Maryland's state section overrides a comparable county ordinance only to the extent the ordinance gives tenants less protection.

Keep the output of each step in the file. A later reviewer should be able to see which line you used and why.

A worked example

Consider a hypothetical Texas file. A firm manages four buildings for one owner. Building A has four units, Building B has six, Building C has three, and Building D has eight. Under the Texas guide, Buildings A and C have four or fewer units, so the 12% figure applies to them. Buildings B and D have more than four, so the 10% figure applies. Each building is sorted on its own, which is why the file should list units on each building instead of one total.

Now a hypothetical Georgia file. An owner holds eleven properties. The Georgia line covers ten or fewer, so on its face the ten-property exemption does not reach this owner. The file should still record the count, because a change in holdings could change the answer. Record the count and the date you checked it, so the next reviewer can see what was true when the decision was made.

Last, a hypothetical Minnesota file. The owner's paperwork describes a property as a park. Before the carve-out in the Minnesota section is applied, the file needs the definition in section 327C.015 and facts showing that the property meets it. The owner's label is not enough on its own, and neither is a guess from how the site looks.

What this guide does not cover

Two of the three state exemption sources are resource guides. They are useful for orientation, but they are not the law. The Minnesota, Washington, and Maryland sources are statute text, which is closer to the rule itself, but each quote is a single provision. It does not show the whole section or any later changes. Check the current text for the state before you rely on it.

This post also leaves out notice periods, security deposit rules, and rent-increase timing. Those are real questions in landlord files, but they are separate topics with their own sources. Keep them in a separate review so they do not get mixed into an exemption decision.

Nothing here is legal advice. If a file involves a dispute, a court date, or a question about who is liable, bring in someone qualified in the state where the property sits.

Sources