Skip ahead to the main page
Partner Huddle
Pages

5 Form W-4 items to check when a new employee starts

Partner Huddle Editorial Team · Published · 12 min read

When you take on a client's payroll, the new-hire paperwork is easy to rush. The start date is close, the employee is eager to begin, and the Form W-4 goes into a folder that nobody opens until a question comes up months later. A few minutes of checking at intake prevents most of that trouble. It also means the first paycheck is calculated from a form that is complete and clear.

This post covers five things to look at on the federal Form W-4, the withholding certificate an employee gives their employer. The guidance quoted here comes from the IRS publication Publication 15-T (2026), Federal Income Tax Withholding Methods. It covers federal withholding only. States may have their own forms and rules, so check those separately for each client.

The checks are simple, but they work best as a routine. Use the same order for every new hire, write down what you find, and send questions back to the employee before the first pay run rather than after it.

Who does the review matters too. In many firms, an operations lead or payroll specialist does the first pass, and a partner looks at anything unusual. That split works well when the first pass follows a written checklist, because the partner can then focus on exceptions instead of re-reading every form. If your firm does not have that split yet, agree on it before the next new hire starts rather than in the middle of an onboarding week.

1. Check that Step 1 is complete

Step 1 holds the basic identity information on the form: name, address, Social Security number, and filing status. The IRS describes what a form received in 2020 or later should show:

Step 1 fieldWhat to confirmCommon issue
NameMatches the rest of the onboarding packetDiffers from other onboarding records
Address Filled in and matches onboarding recordEmployee has moved since filling out the form
Social Security numberNumber entered, not a dummy value or partial Note such as "to follow"
Filing statusOne status selectedNote written beside the status instead

> "Every Form W-4 employers receive from an employee in 2020 or later should show a completed Step 1 (name, address, social security number (SSN), and filing status) and a dated signature in Step 5." ( IRS Publication 15-T (2026))

Go through the four fields one at a time instead of glancing at the page. A blank field is easy to miss on a form that otherwise looks full, and a partly filled field can look finished at a quick read.

  • Name. Compare it with the name the employee gives you on the rest of the onboarding packet. If the two differ, ask the employee which version is right and have them correct the form. Do not retype a name from memory or from a business card.
  • Address. Confirm it is filled in and that it matches the address in your onboarding record, if you keep one. If the employee has moved since they filled out the form, have them write the new address on the form.
  • Social Security number. Confirm that a number is entered and that it is not a dummy value, a partial number, or a note such as "to follow." Keep the number in your secure payroll system and out of email threads and shared spreadsheets.
  • Filing status. Confirm that one status is selected. If the employee has written a note beside the status instead of selecting it, ask them to confirm which status they mean.

Write down any gap as you find it. You will need that list when you contact the employee.

These four entries are what the IRS guidance describes for a complete Step 1, so check all four even when the rest of the form looks finished. A form can look full at a glance and still be missing one of them.

2. Confirm the form is the current version

The form changed with the 2020 version. The IRS guidance says:

Version issueWhat IRS guidance saysAction at intake
Withholding allowances No longer used to request adjustments, beginning with the 2020 Form W-4Return the form for the current Form W-4
Older copy printed from a shared drive Not addressed directlyCompare headings with the current Form W-4
PDF sent by a previous employerNot addressed directlyRequest a fresh copy
Photographed paper formNot addressed directlySet the old one aside

> "Beginning with the 2020 Form W-4, employees are no longer able to request adjustments to their withholding using withholding allowances." ( IRS Publication 15-T (2026))

That means you are checking more than whether the form is signed. You are checking whether it is a current-style form. If the form asks the employee to claim withholding allowances, or if the employee hands you a number of allowances and asks you to apply it, do not copy that number into payroll. Treat it as a problem to resolve. Return the form and ask the employee to complete the current Form W-4.

Many employees have filled out an older form at a previous job, so it helps to say plainly that the current form asks for different information. A sentence like "This form is laid out differently from the one you may remember, so please use the current version" avoids a round of confusion and keeps the request from sounding like a mistake on the employee's part.

Often the easiest way to check the version is to compare the form in front of you with the current form on the IRS website. If you are unsure which version an employee has given you, ask for a fresh copy rather than guessing. A short email with the link to the current form saves time for both you and the employee.

Forms also arrive in different ways. An employee might print an older copy from a shared drive, fill out a PDF that a previous employer sent them, or photograph a paper form and email it to you. Each route can pick up an out-of-date layout. Before you accept a form, compare its headings and sections with the current Form W-4 rather than trusting the file name alone. If anything differs, request a fresh copy and set the old one aside so nobody works from it by mistake.

3. Fill Steps 2, 3, and 4 only if they apply

Many new hires see a long form and assume every line needs an entry. The IRS guidance says otherwise:

> "Employees complete Steps 2, 3, and/or 4 only if relevant to their personal situations." ( IRS Publication 15-T (2026))

This is an item that often causes unnecessary back-and-forth. A blank Step 2, 3, or 4 is not, on its own, a sign of an incomplete form. Do not ask every employee to fill every step, and do not fill in those steps for the employee based on what you think their situation probably is. If an employee has written something in one of these steps, ask them whether it reflects their current situation.

When you explain this to a new hire, you can say that the form is complete once every part that applies to them is filled in. Blank steps that do not apply are expected, and a short message is usually enough to clear up anything else. Keep the explanation brief so the employee does not feel they have failed a test.

The table below compares the five items side by side. It uses only the facts from the IRS guidance, with a short note on what to check at intake.

Form W-4 itemWhat the IRS guidance says What to check at intake
Step 1Should be completed on a form received in 2020 or later Name, address, SSN, and filing status are all filled in
Step 5Should carry a dated signature on a form received in 2020 or later Signature and date are both present
Steps 2, 3, and/or 4Completed only if relevant to the employee's personal situation Blank steps are not treated as errors on their own
Withholding allowancesEmployees can no longer request adjustments with them, beginning with the 2020 Form W-4 Allowance-based requests go back to the employee
Adjustment amounts Employees provide amounts to increase or decrease withholding and the wage income subject to withholdingEach amount is copied exactly, and unclear amounts are confirmed

4. Review the adjustment amounts

The current form lets employees ask for changes to their withholding through amounts, not allowances. The IRS guidance describes it this way:

Adjustment entryWhat IRS guidance says What to check at intake
Amount to increase or decrease taxes withheldEmployee provides this amount Amount sits in the field the employee chose
Amount to increase or decrease wage income subject to withholdingEmployee provides this amount Figure entered exactly as written
Unusual figureNot addressed directlyAsk employee to confirm; do not change it
Confirmation record Not addressed directlyRecord who confirmed the figure and the date
Withholding allowancesNo longer used, beginning with the 2020 Form W-4 Allowance-based requests go back to the employee

> "Instead, using the new Form W-4, employees provide employers with amounts to increase or decrease the amount of taxes withheld and amounts to increase or decrease the amount of wage income subject to income tax withholding." ( IRS Publication 15-T (2026))

Amounts are where a small mistake does the most damage. A figure written in the wrong place, or a digit copied wrong, can affect withholding on every paycheck until someone notices. Give these entries a careful look:

  • Confirm that each amount sits in the field the employee chose for it. An amount in the wrong box is not the same as the amount the employee meant.
  • Enter each figure exactly as written. Do not round it, adjust it, or make it "look right."
  • If a figure seems unusual for the employee's pay, ask them to confirm it. Do not change it on their behalf.
  • Record who confirmed the figure and the date they did it. If the employee changes it later, you will have a clear starting point.

Here is how a review can go. Suppose a new hire returns a form with an amount written beside a field where it does not seem to belong. The new hire has done nothing wrong. The useful move is to write down exactly what the form shows, send the employee a short message that quotes the line and asks which amount they meant, and hold the figure out of payroll until the employee answers. Keep the question specific so the answer can be confirmed in one reply.

Keep a note in the employee file that records where the adjustments came from, so the next person who opens the file can see the starting point.

5. Confirm the Step 5 signature is dated

The last item is the signature. The IRS sentence quoted in section 1 calls for a dated signature in Step 5 on any form an employee gives you in 2020 or later. A form with no signature, or with a signature and no date, does not yet show what the IRS guidance describes, so it is not finished.

Check the signature and the date together, and check them before the employee leaves the onboarding meeting if you are there in person. A date that is missing or obviously wrong can be fixed by the employee on the spot, which is far easier than tracking them down after payroll has started. Do not sign or date the form for the employee. If the form needs to go back, send it with a short note that names the exact line to complete.

Pay attention to timing as well. If the employee signs at the start of the onboarding meeting, the date should match that day. A date that is far earlier or later than the rest of the onboarding paperwork is worth a question. You do not need to treat every date as suspect. The goal is to make sure the form you file is the form the employee actually completed and signed.

When something is missing

Most intake problems can be solved in a single message if you handle them the same way each time. Keep these habits:

  • List every gap in one message. Name each missing field, unsigned line, or unclear amount. Employees are more likely to respond quickly when they can see the whole list at once.
  • Give a clear deadline that falls before the first pay run. Pick a date that leaves time for the employee to respond and for you to set up payroll correctly. If the form cannot be completed by then, tell your client's HR or operations contact so they can decide how to handle the first pay run.
  • Use plain language in the request. A message can be as short as this: "Thanks for returning your Form W-4. Before we set up payroll, please complete the Social Security number field and date your signature in Step 5. Send the corrected form to us by the date below." Name the exact fields, and give one date.
  • Do not guess. A guessed Social Security number, filing status, or adjustment amount causes more trouble than a late form. If a value is missing, leave the setting unset or flagged until the employee provides it.
  • Keep the completed form in the employee file. Store it with the rest of the onboarding records, and limit who can see it, since it contains a Social Security number.

Once the form is complete, hand it to payroll with your review notes attached. A short cover note that lists the items you checked, who confirmed each amount, and which questions are still open lets the person setting up the first pay run work from the file rather than from memory. If something is still open on that run, the note tells them exactly what to follow up on.

These checks take minutes when they are part of intake and much longer when they are discovered after the first paycheck. Build the same five-item review into every new-hire file, and the first pay run will start from solid ground.

Quick checklist

  • Step 1: Name, address, SSN, and filing status are filled in.
  • Form version: The form is the current style, with no withholding allowances requested.
  • Steps 2, 3, and 4: Completed only where they apply to the employee.
  • Adjustment amounts: Each amount is copied exactly and confirmed when unclear.
  • Step 5: The signature and date are both present.

Related guides: New-hire report within 20 days: 7 data fields · Accounting Client Intake Checklist for a Clear Handoff · Arizona Form A-4 is due within 5 days of a new hire's start.

Sources