A 2025 return is required when gross income for the year is at least the amount on the appropriate line of Table 1 in IRS Publication 501, and a spouse's death in 2025 means that publication's spouse-death guidance must be read before those tables are used. The spouse counts as 65 or older at the end of 2025 only if the spouse was 65 or older at the time of death, so a birth date before January 2, 1961 does not settle the question on its own.
The short answer: two tests decide the 2025 filing question
Start with the instruction the IRS puts first. Publication 501 says that if your spouse died in 2025, you should read its guidance on that situation before you use Table 1 or Table 2 to find whether you must file a 2025 return. A death changes the facts that go into the tables, so a return that would be clear in an ordinary year needs a second look here.
The filing question then breaks into two tests. The first is the income test. The publication says you must file if your gross income for the year was at least the amount shown on the appropriate line in Table 1. The second is the age test, which asks whether the deceased spouse counts as 65 or older at the end of 2025. The publication answers that with a rule tied to age at death, not birth date, and that is where many offices go wrong when they rely on the date of birth in the client file.
Work the tests in that order. Settle the spouse-death guidance first, because it governs which facts are valid for the rest of the file. Then compare gross income with the Table 1 line. Only after that does the spouse's age come into play. Neither test replaces the other. Each answers a separate question, and the file needs both answers recorded before the partner decides whether the return is required.
What two tests determine whether a 2025 return is required after a client's spouse dies?
The first test compares the client's 2025 gross income against the appropriate line in Table 1 of Publication 501. The second test asks whether the deceased spouse was 65 or older at the time of death, since that determines whether the spouse counts as 65 or older at the end of 2025. Both answers must be recorded before deciding whether a return is required.
Does a birth date before January 2, 1961 prove the spouse counts as 65 or older at the end of 2025?
No. Publication 501 states that even if the spouse was born before January 2, 1961, the spouse is not considered 65 or older at the end of 2025 unless the spouse was 65 or older at the time of death. Age at death is the controlling fact, not the birth date.
When is a person considered to reach age 65 under the publication's timing rule?
A person is considered to reach age 65 on the day before the person's 65th birthday. In a spouse-death file, this single day can decide which side of the age test the spouse falls on, so both the 65th birthday and the computed reach-age date should be written in the workpaper.
Does New York's pension exclusion for a deceased spouse depend on the surviving spouse's age?
No. The New York State Department of Taxation and Finance tests the decedent: the decedent was over age 59½ and would have been entitled to the pension and annuity income exclusion had the decedent continued to live. The surviving spouse's age is not part of that test.
What is the combined limit on disability and pension exclusions in New York?
If a client has disability income qualifying for the disability income exclusion and pension and annuity income qualifying for the pension and annuity income exclusion, the total combined exclusion cannot exceed $20,000. Each exclusion should be computed in its own column, then combined and capped in one place.
What cost basis applies to an inherited home after a spouse dies?
For deaths in any year except 2010, the basis is the fair market value of the home on the date of the previous owner's death, or on the alternate valuation date if the executor elected to value the estate's assets as of six months after the owner's death. The 2010 exception does not apply to a 2025 death, so the general rule governs.
Test one: gross income against the Table 1 line
The first test asks one question: was the client's gross income for the year at least the amount shown on the appropriate line in Table 1? Publication 501 states the rule directly. Each phrase in that rule does work, so it is worth reading them one at a time.
Gross income is measured for the year, which here means 2025. Total it from the year's records before you touch the table. Keep that figure separate from any other income measure you use in the file, since this test is written in terms of gross income. The phrase "the appropriate line" means you choose the line before you compare, not the first line you see. The table is built so that the applicable line depends on the filer's facts, and the spouse's death is one of those facts.
A workable sequence follows from the rule:
- Read the spouse-death guidance first.
- Total 2025 gross income from the client's records.
- Identify the appropriate Table 1 line for the client's facts.
- Compare. If gross income is at least the line amount, the income test requires a return.
A result below the line means this test alone does not require a return. The rule is written as a floor, so falling under it does not trigger the requirement. Run the second test before concluding anything, because the two results are read together.
Pension income of a deceased New York spouse
The New York State Department of Taxation and Finance addresses one specific case on its information for retired persons page. The page says the decedent was over age 59½ and would have been entitled to the pension and annuity income exclusion had the decedent continued to live. Both conditions are tested on the decedent, not on the surviving spouse.
| Item | What the state page says | Figure |
|---|---|---|
| Decedent's age | Over age 59½ | 59½ |
| Entitlement test | Would have been entitled to the pension and annuity income exclusion had the decedent continued to live | None stated |
| Whose age counts | The decedent's | None stated |
The first condition is an age test: the decedent must have been over 59½, so check it against the decedent's birth date in the file. The second condition is a hypothetical about entitlement. The question is whether the decedent would have qualified had they continued living, and the preparer has to reconstruct that from the pension facts.
In practice, gather three things: the decedent's birth date, the pension and annuity amounts the decedent received, and the terms that would have governed that pension had the decedent lived. Keep the analysis within those two conditions, and do not extend it into rules about payments made after death.
The disability and pension exclusion ceiling
Some clients receive both disability income and pension income in the same year, and the state page covers that combination directly. It says that if you have disability income that qualifies for the disability income exclusion and pension and annuity income that also qualifies for the exclusion, the total exclusion combined cannot exceed $20,000. The same page treats the ceiling as one combined figure, not a separate limit for each type of income.
| Exclusion type | Qualifying condition | Combined limit |
|---|---|---|
| Disability income | Qualifies for the disability income exclusion | Counts toward the single combined $20,000 cap |
| Pension and annuity income | Qualifies for the pension and annuity income exclusion | Counts toward the single combined $20,000 cap |
Add the disability exclusion and the pension and annuity exclusion together. If the total would go above $20,000, the combined exclusion is capped at that figure. Keep the two exclusions in separate working columns so you can show how each was determined, then combine them only at the end.
The ceiling works alongside the decedent-based pension test. Only pension income that passes that test enters the pension figure, and disability income that qualifies for its own exclusion enters the disability figure. A file where the decedent's pension qualifies but the disability income does not carries only the pension exclusion into the combined figure.
For an operations lead, the practical step is to record each exclusion on its own line of the workpaper and apply the cap in one place. A single combined number can then be traced back to the qualifying income behind each part of it.
Test two: the spouse's age at death
The second test concerns the deceased spouse's age, and the IRS publication states a precise rule. It says to consider your spouse to be 65 or older at the end of 2025 only if your spouse was 65 or older at the time of death, as set out in Publication 501. The word "only" makes this a condition, not a suggestion, and age at death is the measure the rule uses.
The test runs in a fixed order. First, establish the spouse's age at the time of death from the records. If the spouse was younger than 65 at death, the spouse is not considered 65 or older at the end of 2025.
If the death record is missing or unclear, get it before running the test rather than estimating from the birth date. The answer belongs in the file next to the date of death. The surviving spouse's own age is a separate question. The rule concerns the deceased spouse, so a preparer should not substitute the surviving spouse's age into the same check. Record the date of death and the spouse's birth date together, so the age at death can be confirmed in one place and the year-end status follows from it without a second source.
Why a birth-date rule does not count
Many files show a spouse's birth date and nothing else, which makes a birth-year shortcut tempting. Publication 501 rejects that shortcut directly. Even if your spouse was born before January 2, 1961, your spouse isn't considered 65 or older at the end of 2025 unless your spouse was 65 or older at the time of death. The birth date can raise the question but cannot answer it.
| Measure | Birth date alone | Age at time of death |
|---|---|---|
| Date or age used | Born before January 2, 1961 | 65 or older at time of death |
| Counts as 65 or older at end of 2025? | Not on its own | Yes, if 65 or older at death |
| Page wording | Not considered 65 or older unless 65 or older at death | Considered 65 or older only if 65 or older at death |
The table shows why the shortcut fails. A birth date before the January 2, 1961 cutoff is necessary to look at, but it is not sufficient. A spouse born before that date who died while still under 65 fails the test, so the birth year alone would give the wrong answer for that spouse.
In workflow terms, the birth date can help you anticipate the age at death, but it does not replace the death record. When the two disagree, the age at death governs under the publication's rule. Enter the age at death as the controlling fact, and note in the workpaper that the birth-year route was considered and set aside.
Counting the 65th birthday
The IRS publication includes a timing rule for the age question: "A person is considered to reach age 65 on the day before the person's 65th birthday." A preparer who looks only at the birthday may place the milestone a day later than the publication does, and in a spouse-death file that single day can decide which side of the age test a spouse falls on.
| Timing step | What it establishes | Effect on the age test |
|---|---|---|
| Find the 65th birthday | Spouse's 65th birthday from the birth record | Starting point for the rule |
| Step back one day | Day before the 65th birthday | Date the spouse is considered to have reached 65 |
| Death on or after that day | Age at death is 65 or older | Age test is met |
| Death before that day | Age at death is under 65 | Age test is not met |
Apply the rule to the date of death. Find the spouse's 65th birthday from the birth record, then step back one day. That earlier date is the day the publication treats the spouse as having reached 65. If the spouse died on or after that day, the age test is met. If the spouse died before that day, the test is not met. Write both dates in the workpaper, because the comparison is between two calendar dates.
Two habits keep the calculation clean. Record the birth date exactly as it appears in the records, because a year-only entry cannot locate a 65th birthday. Label the computed date as the reach-age date, not the birthday, so a later reviewer can see which rule was applied.
This timing rule decides only when a person is considered to have reached 65. It does not decide whether a return is required. That answer still comes from the income test and the spouse-age test.
Inherited home basis after a spouse dies
When a client's spouse dies and the couple owned a home, the home's basis matters if the home is later sold. TurboTax states the rule for deaths in most years: "For deaths in any year except 2010, your basis is the fair market value of your home on the date of the previous owner's death, or on the alternate valuation date if the executor of the estate elected to value the estate's assets as of six months after the owner's death." Two valuation points appear there, and which one applies depends on an election the executor makes.
| Option | Valuation point | When it applies |
|---|---|---|
| Date of death | Fair market value of the home on the date of the previous owner's death | The default under the rule |
| Alternate valuation date | Fair market value as of six months after the owner's death | Only if the executor elected to value the estate's assets that way |
The file should show which valuation point the basis uses. The date-of-death value and the value six months later are two separate figures, and the file needs the one the rule points to, not a current market estimate.
Confirm the election with the estate before fixing the basis. The preparer usually cannot tell from the client's records alone whether the executor chose the alternate date, so the estate's file is the place to check. Record the election status, the valuation date, and the source of the value in the same workpaper, so the basis can be traced when the home is sold. A basis recorded at the time of death saves a later preparer from rebuilding it years afterward, when the valuation records may be hard to find.
Filing the 2025 return for an operations lead
Operations leads usually handle intake, so the first job is to flag any file where a client's spouse died in 2025. The flag should reach the partner before anyone runs the tables, because the spouse-death guidance changes which facts go into the calculation. A flagged file gets a separate review step and a note that the guidance was read. See also the Accounting Client Intake Checklist for a Clear Handoff.
Where a client received pension income from a deceased spouse's plan and the file involves New York, the state rule has two conditions. The New York State Department of Taxation and Finance says the decedent "was over age 59½ and would have been entitled to the pension and annuity income exclusion had the decedent continued to live." Both conditions are tested on the decedent. Record the decedent's birth date, the pension amounts received, and the basis for saying the exclusion would have applied, so the partner can check the reasoning quickly.
If the client also has disability income, add a second step. The same state page provides that the combined exclusion for disability and pension income cannot exceed $20,000. Compute each exclusion in its own column, combine them, and apply the cap in one place. The workpaper then shows the qualifying income behind each part of the figure.
When the death record is not in the file, request it from the client or the estate before the partner signs off, and note the date of the request. A missing record is a reason to hold the file, not a reason to estimate the spouse's age.
The operations lead's checklist is short: flag the file, confirm the spouse-death guidance was read, run the income test, run the age test on the age at death, and record the state exclusion steps where they apply. Hand the completed workpaper to the partner with each figure's source noted.
Estate and home-sale follow-up
The filing decision is not the end of the file. A client whose spouse died in 2025 may still face questions about the home, and those questions can extend into later years, so the follow-up work belongs in the file from the start.
The key document is the estate's election. TurboTax explains that the basis is the fair market value on the date of death, or on the alternate valuation date if the executor elected to value the estate's assets as of six months after death. Ask the client or the estate's representative for the election and the valuation documents. If no election was made, the date-of-death value is the one that applies.
Set a follow-up reminder for the home's status. If the home is sold, the basis from the valuation point in the file is the starting figure. If the home is kept, the same figure remains the reference for later decisions. Store the valuation documents, the election record, and the date-of-death figure with the 2025 return file, and cross-reference the file number in the estate notes so the trail stays intact.
Do this today
Reader questions on spouse deaths in 2025
Does the New York pension rule depend on the surviving spouse's age? No. The state page tests the decedent: the decedent was over age 59½ and would have been entitled to the exclusion had they continued to live.
Can a client claim both disability and pension exclusions in full? Not when the total is above the limit. The state page says the combined exclusion cannot exceed $20,000, so the two exclusions are added together and capped at that figure.
What basis applies if the executor chose the alternate valuation date? The basis becomes the fair market value as of six months after the owner's death, as TurboTax describes. The executor makes that election, so the estate's records are the place to confirm it.
What basis applies if there was no alternate election? The default is the fair market value on the date of the previous owner's death. Record that figure and the source of the valuation.
Does the decedent's pension need checking if the client has other income? Yes, if the pension is the decedent's. The state page tests the decedent's age and entitlement, so the decedent's facts are the ones to document, whatever other income the client receives.
Does the New York rule cover every type of income? No. The state page addresses the pension and annuity exclusion and the disability income exclusion. Other income should be checked against the rules that apply to that income type.