Skip ahead to the main page
Partner Huddle
Pages

Supplemental pay withholding: 5 checks before a bonus run

Partner Huddle Editorial Team · Published · 11 min read

Before a bonus run, check five things: the supplemental wage label, the withholding method, Social Security and Medicare, and the two thresholds. A bonus run is one of the more routine jobs on a payroll calendar, and that is exactly why small mistakes get through. A client schedules a year-end bonus, someone loads the amounts into the pay file, and the batch goes out. Partners and operations leads at small accounting firms often get the last look at these numbers. By that point the useful question is no longer "what is the bonus?" It is "what will the withholding and payroll taxes actually come to, and does the client agree?"

Key takeaways

  • Get the recipient list, amounts, and pay labels from the client in writing.
  • Confirm each payment is designated as supplemental wages (section 1).
  • Confirm the withholding method and 22% option eligibility against each recipient's withholding history (section 2).
  • Recompute the Social Security, Medicare, and Additional Medicare lines with year-to-date wages, and test one bonus by hand first (sections 3 and 5).
  • Pull year-to-date supplemental totals for anyone near the $1 million threshold, and reconcile the register after the run (section 4).

This post walks through five things to check. Each one comes down to a label, a rate, or a threshold that changes the result. None of them requires you to be a payroll specialist, but each one calls for a direct question to the client before the money is released. Where a rule is stated below, the source is linked next to it, and the figures come from those pages. Anything that depends on a client's particular setup is a question to ask, not a conclusion to draw.

Start with the basic principle. Paychex puts it plainly: supplemental payments are "taxable compensation to employees and subject to employment taxes just like regular wages." A bonus is not a side payment that sits outside payroll. It belongs in the same review you would give a regular paycheck, with a few extra checks on top.

1. Confirm the bonus is labeled as supplemental wages

The label is the first thing to verify, and it is easy to overlook because a bonus often looks like any other amount on the report. TurboTax explains what happens when the label is missing: "If your employer does not designate your pay as supplemental wages and includes it with your regular wages, the supplemental withholding rate does not apply and taxes are withheld using the information you provided on Form W-4."

That sentence changes the withholding math. A bonus folded into a regular paycheck is not handled the same way as one that is designated and separately identified. Before the run, ask the client two things. Is the bonus being paid as its own line, with its own pay code? And has the client's payroll system designated it as supplemental wages?

The answers should match what the client expects. If the client wants supplemental treatment but the bonus was loaded into regular pay, the withholding will be off. It will also be off in a way that is easy to miss, because the employee's check will look normal on the surface. Ask the client to show you the pay code, not just describe it.

Beancount describes the work for small employers as a sequence: they "can classify, calculate, record, and reconcile supplemental wages under the 2026 federal rules." Treat those four verbs as a checklist. Classification is the first item here. Calculation is covered in sections 2 through 5, and reconciliation is the last step, listed in the key takeaways above. Recording is what makes the other three possible, because if the register does not show the bonus as its own item, nobody can check it later.

2. Check the withholding method and the 22% option

The number people most often quote for bonuses is 22%, and it is easy to apply more broadly than the rule allows. Beancount states the limit directly: "The 22% figure applies only to the optional federal income-tax withholding method for eligible supplemental wages." Two words in that sentence do most of the work. "Optional" means someone has to choose the method, so 22% is not automatic for every bonus. "Eligible" means not every supplemental payment qualifies.

Ask which federal income-tax withholding method the payroll is using for this batch. If the answer is the 22% method, ask whether each payment is eligible. A guide on applying the flat rate before a client bonus payroll covers that step. If the client cannot say, stop there. A batch with an unclear method is not ready to release, however small the bonuses are.

Eligibility includes a prior-year condition, and it is an easy part to skip. The same guide says: "If you did not withhold federal income tax from the employee's regular wages in the current or immediately preceding calendar year, you generally cannot use the 22% option for the separately identified payment."

This matters most for employees who joined the client recently, who moved between pay arrangements, or whose regular wages were not subject to federal income-tax withholding. Pull the withholding history for each recipient for the current and the prior calendar year. If any recipient has a gap, the 22% option may not be available for that person, and that payment needs a different method. The word "generally" in the source is worth noticing. It suggests the rule has exceptions, and this post does not list them. Check the details against the official guidance before you rely on the 22% method for anyone with an incomplete history.

3. Recompute Social Security and Medicare on every recipient

Payroll taxes on a bonus are not a rounding exercise. They are fixed rates with limits, and each recipient's year-to-date wages decide how much of the bonus is subject to each limit. The table below lists the figures from the guide linked in section 2, so you can check the client's report against them without going back to the source each time.

ItemRateLimit or threshold
Social Security, employee6.2%Up to the $184,500 wage base
Social Security, employer6.2%Up to the $184,500 wage base
Medicare, employee1.45%No wage base limit
Medicare, employer1.45%No wage base limit
Additional Medicare, employee0.9%Wages above $200,000 for the year
Optional 22% federal income-tax method22% Eligible supplemental wages only

Source for all rows: Beancount's guide to supplemental wages in 2026. The guide states that "Social Security tax is 6.2% for the employee and 6.2% for the employer, up to the $184,500 wage base." It also states that "Medicare tax is 1.45% for the employee and 1.45% for the employer, with no wage base limit."

Because Social Security stops at the wage base, a recipient who has already earned close to that amount for the year may see only part of the bonus taxed at that rate. Medicare has no such cap, so it applies to the whole bonus. Those two facts are why you should not estimate payroll tax as a flat percentage of the gross bonus without looking at year-to-date wages.

For each recipient, apply each rate only to the part of the bonus its limit covers, using that recipient's year-to-date wages, and compare the result to the client's report. Do this yourself rather than trusting the report's total. A mismatch is a question for the client, not a detail to fix quietly. Note the line items you checked, the year-to-date wages you used, and the result, so the same check can be repeated if the batch is corrected.

4. Watch the $1 million threshold

Most small-firm bonuses will never come near this threshold, but a few will, so it is worth checking every time. Beancount says: "Special treatment applies when an employee's supplemental wages from you exceed $1 million during the calendar year."

Two things about that sentence matter for your review. The first is the word "from you." The threshold is measured on supplemental wages paid by your client, not on one bonus or across all of an employee's jobs. The second is "during the calendar year." The total is cumulative. A large bonus paid in December can cross the line even if the employee's earlier supplemental payments looked ordinary in isolation.

For executives and other high earners, pull the year-to-date supplemental totals before the run, not after. Include every payment the client has classified as supplemental this year, not just the bonus list in front of you. If the total is close to the threshold, stop and confirm the treatment with the client's payroll provider and the official guidance before releasing the payment. This post does not describe what the special treatment is, and it should not be treated as a substitute for checking the details.

5. Check for the Additional Medicare threshold

Additional Medicare Tax is the last number to check, and it is easy to miss because it depends on the employee's full-year wages, not on the bonus alone. Beancount states: "Additional Medicare Tax is an extra 0.9% withheld from an employee's wages after that employee's wages exceed $200,000 for the year."

The threshold is measured for each employee, against that employee's wages for the year. A bonus paid late in the year can be the payment that takes wages over $200,000. Because the extra withholding applies after the threshold is crossed, a single bonus can sit partly below the line and partly above it. That means the check is not simply whether the bonus is large. It is whether this employee's year-to-date wages, plus the bonus, go past $200,000, and where the crossing happens. For more on this check, see Additional Medicare tax checks for reviewers.

The same guide gives a useful example of the easy case, which is a good baseline for your own review. It describes "a separately paid $5,000 bonus for an employee who is below the Social Security wage base and has not crossed the Additional Medicare Tax threshold." If the recipient is well under both limits, the bonus is simpler to check. If the recipient is near either one, the example does not apply, and you should recompute the lines with the actual year-to-date figures.

Illustrative example: a $5,000 bonus

The Beancount guide gives one concrete case. It states that, "before state tax and voluntary deductions, the employee-side federal income-tax withholding would be $1,100, Social Security would be $310, and Medicare would be $72.50."

You can reproduce those figures from the rates: 22% of $5,000 is $1,100, 6.2% is $310, and 1.45% is $72.50. Pick one bonus from the batch, recompute its lines by hand, and compare the result to the client's report before you approve anything. If a figure does not match, ask the client the specific question it raises.

When the figures do not tie out

Batches that fail review often do so for a simple reason: a label was missing, a method was assumed, or a year-to-date total was never pulled. The fix is usually a short conversation with the client, not a change made on your own. Ask for the specific pay code, the method, or the withholding history that does not match, and document the answer. For a first run, see the payroll setup checklist.

Decide in advance who signs off on the batch. In a small firm this is often a partner, but the person who checks the numbers and the person who approves the release should be clear to everyone involved. If the reviewer cannot tie out a line, the approver should not release it on the reviewer's behalf. Write the sign-off down with the date, the batch name, and the list of recipients it covers, so the approval is tied to the exact list that was reviewed. If the list changes after approval, the approval should be reopened, because the figures you checked no longer describe the batch that will be paid.

Hold the batch when a figure cannot be explained. A short delay is cheaper than correcting withholding after employees have already received their pay, and it is much easier to explain to a client on the day of the run than a corrected check two pay periods later. If a recipient's situation is unclear, such as a gap in withholding history or a total near a threshold, flag that person separately and resolve the question before the rest of the batch goes out, if the payroll system allows it.

Finally, keep a short review record for each run. List the checks you made, the figures you used, the questions you asked, and the answers you received. That record makes the next bonus run faster, because the same questions come up again, and it gives you something concrete to point to if a number is challenged later. Five checks will not cover every case, but they point to the places where a supplemental payment is most likely to go wrong, and each one can be confirmed with a question and a short calculation.

Next step today

Today, pull each bonus recipient's withholding history for the current and prior calendar year, and mark anyone with a gap for a separate look before the run.

Related guides: Failure to pay penalty: 4 figures to check · Client payroll employee file: 4 checks before pay.

Frequently asked questions

Can the 22% option apply to every bonus? No. It applies only when the optional method is chosen and the payment is eligible.

Does Social Security apply to the whole bonus? Not always. Only the part of the bonus below the $184,500 wage base is taxed at 6.2%.

General information, not legal or tax advice.

Sources