Skip ahead to the main page
Partner Huddle
Pages

Fixed asset cards: 2 supply costs that could be capitalized

Partner Huddle Editorial Team · Published · 11 min read

Why supply costs end up on fixed asset cards

Small accounting firms that keep client fixed asset records in Business Central or Manager often see the same pattern. A client buys a machine, the invoice is easy to file, and the asset goes onto a fixed asset record. Then a second invoice arrives for parts, consumables, or materials, and nobody is sure whether it belongs on a record at all. Some of those costs are simply expenses. Others may need to be capitalized, and that choice changes how the cost moves through the client's books and tax returns.

This post walks through two kinds of supply costs that the IRS says could be subject to capitalization. It then shows how to set up the matching records in Business Central and Manager, and it includes a review checklist you can use before a record is saved. This is practical guidance for bookkeeping work, not tax advice. The client's tax preparer or advisor makes the final call.

The two kinds of supply costs

The starting point is the IRS's own wording. On its page about the tangible property final regulations, the agency says that "an otherwise deductible material or supply cost could be subject to capitalization under section 263(a) if you use the material or supply to improve property or under section 263A if you incorporate the material or supply into property you produce or acquire for resale." The IRS page on tangible property final regulations is the place to read that language in full.

Cost type Section namedWhat the IRS says
Supply used to improve property263(a)Could be subject to capitalization
Supply incorporated into property produced or acquired for resale263ACould be subject to capitalization
Direct and allocable indirect costs of producing property or acquiring it for resale263AThe IRS says these costs are capitalized under a general rule
Rotable and temporary spare parts under the optional method1.162-3(e)The regulation does not apply

Source: IRS

Two things in that sentence matter for daily work. First, the rule starts with a cost that would otherwise be deductible. A supply is not capitalized just because it is a supply. The question is whether one of the two conditions applies. Second, the IRS says "could be subject to capitalization," not "must be." That language tells you to test each case against the facts rather than apply a blanket rule to every supply invoice.

The first kind is a supply used to improve property. Under section 263(a), a supply the client uses to improve a piece of property may be subject to capitalization. The question is what the supply is used for, not what the invoice calls it. A part that goes into equipment to improve it is a different question from a part bought for some other purpose, and the bookkeeper's job is to find out which situation applies before the record is set up.

The second kind is a supply incorporated into property the client produces or acquires for resale. Under section 263A, a material or supply that becomes part of something the client will sell may need to be capitalized into that property. Here the supply is not a standalone cost. It is one input into an item the client plans to resell.

The IRS page also states the broader framework for section 263A: "The final regulations do not eliminate the requirements of section 263A, which generally provide that you must capitalize the direct and allocable indirect costs of producing real or tangible personal property and acquiring property for resale." That sentence reaches beyond the supply itself. It covers direct costs and allocable indirect costs connected with producing property or acquiring it for resale, so the supply on the invoice is only part of the picture for that kind of property.

The same page describes where these rules came from. It says that "your decisions were guided by decades of often conflicting case law, as well as administrative rulings on specific factual situations." The practical lesson is that a general rule may not settle a particular client's invoice on its own. Read the facts first, then match them to the rule.

One exclusion needs its own check. The IRS page says the regulation "does not apply to rotable and temporary spare parts that the taxpayer accounts for under the optional method of accounting under section 1.162-3(e)." Clients who keep spare parts on hand should be asked how they account for them before either case is applied. If a part falls under that exclusion, the regulation does not apply to it, and the tax preparer should confirm the treatment.

Comparing the two cases

The table below lines up the cases the IRS quote supports. Use it as a quick reference, and go back to the source before you rely on any row for a specific client.

SituationSection namedWhat the IRS says
Supply used to improve property263(a)An otherwise deductible supply cost could be subject to capitalization
Supply incorporated into property produced or acquired for resale263AAn otherwise deductible supply cost could be subject to capitalization
Costs of producing property or acquiring property for resale263AThe IRS says you must capitalize direct and allocable indirect costs under a general rule

The first two rows are the two supply cases from this post. The third row is the wider rule for property the client produces or buys to resell. If a supply does not fit either of the first two rows, the sections in this table do not address it, and you should confirm its treatment with the client's tax preparer before it goes on any record.

Setting up the card in Business Central

Microsoft's guidance on acquiring fixed assets gives the order of work in Business Central. The first step is to "enter information about the assets on the Fixed Asset Card page." The Microsoft Learn page on acquiring fixed assets describes the sequence from there. You choose the New action, then fill in the fields on the General FastTab as necessary. Next, on the Depreciation Book FastTab, you fill in the fields as necessary. Microsoft describes the depreciation book step this way: "This step assigns a depreciation book to the fixed asset."

StepActionDetail
1Enter asset informationOn the Fixed Asset Card page
2Choose NewFill in the General FastTab as necessary
3 Fill in the Depreciation Book FastTabFill in the fields as necessary
4Assign the depreciation bookAssigns a depreciation book to the fixed asset

Source: Microsoft Learn

A workable order for a supply cost that you have decided to capitalize looks like this:

  1. Before you open the page, decide which case applies, using the two descriptions above. If the answer is unclear, do not guess. Note the open question for the client and hold the record until it is answered.
  2. Open the Fixed Asset Card page and choose New. Fill in the General FastTab as necessary.
  3. Fill in the Depreciation Book FastTab as necessary. The page is not a form where every field needs a value, so enter what the asset needs and leave the rest alone.
  4. Confirm that the depreciation book assignment is complete. Confirm that the depreciation book assignment is complete, so do not assume it happened because the card looks saved.
  5. Record your reasoning in whatever notes location your firm uses for the client file. Note which case you applied and what facts led you there.

The Microsoft steps quoted above use the phrase "as necessary," and it is worth taking seriously. A supply that is capitalized for one client may need different entries from a machine a different client bought outright. The card should reflect the actual asset, not a copy of the last card you created.

Setting up the record in Manager

Manager's guide on depreciating fixed assets covers two points that matter for this work. The first is sequence numbering. In the words of the Manager guide on depreciating fixed assets, "If the box within the field is checked, Manager will add a sequence number automatically when the depreciation entry is created."

ItemBehaviorCheck for the reviewer
Sequence number boxManager adds a sequence number automatically when the depreciation entry is createdSet the box the same way for every client
Fixed assets, accumulated depreciationDisplayed as a contra asset accountBalance is normally negative

Source: Manager

Set that box the same way for every client you handle, so that depreciation entries follow one pattern across your files. When a reviewer later asks about one entry, a consistent sequence number gives you a fixed reference to point to. Write down the setting you chose for each client file, so the next person who works on it can see it without guessing.

The second point is the balance sheet account. The same guide says that Manager "displays Fixed assets, accumulated depreciation as a contra asset account (meaning the balance is normally negative)." That gives you a simple check. Because the balance is normally negative, a figure with the wrong sign deserves a look before you accept the client's balance sheet. The sign does not tell you whether a supply cost was treated correctly, but it can point to a depreciation entry that went in the wrong direction.

The Manager guide quoted here does not address the choice between the two supply cases. That judgment still happens on your side, before the entry is made. The software records the decision; the guide does not make it for you.

Working through a parts invoice

Suppose a client's invoice covers a batch of replacement parts. One way to work through it, using only the two cases above, is to ask a series of questions in order.

First, ask what the parts will be used for. If the client uses them to improve a piece of property, the section 263(a) case is the one to test. If the answer does not point to either case, the sections in this post do not decide it, and you should confirm the treatment with the tax preparer.

Second, ask whether any part becomes part of goods the client produces or acquires for resale. If it does, the section 263A case is the one to test, and the quote about direct and allocable indirect costs becomes relevant for that property.

Third, check whether any part is a rotable or temporary spare part accounted for under the optional method. If it is, the regulation does not apply to that part, and the two cases above are not the place to start.

Fourth, write down the answer and the facts you relied on, then build the record in the software.

The order matters. Deciding the case first keeps the software entry from driving the tax treatment. The reverse happens often when a bill is filed and categorized before anyone has asked what the item is for.

A review checklist before you save

Use this list for each supply cost that might be capitalized. It works the same way whether the client's records are in Business Central or Manager.

  • Identify the use. Is the supply used to improve property, or incorporated into property the client produces or acquires for resale? If neither, the sections in this post do not address it, so raise it with the client's tax preparer before setting up a record.
  • Check for the spare parts exclusion. Confirm whether the part is a rotable or temporary spare part accounted for under the optional method.
  • Confirm the case in writing. Note which case you applied and the facts behind it, in the client file.
  • For Business Central, confirm that the information on the Fixed Asset Card page is entered and that the General and Depreciation Book FastTabs are complete as necessary.
  • For Business Central, confirm that the depreciation book has been assigned to the fixed asset.
  • For Manager, confirm that the sequence number box is set the same way you set it for other clients.
  • For Manager, check that the fixed assets accumulated depreciation balance carries the normal negative sign.
  • Re-read the IRS page before you finalize any unusual case, since it is the source for the wording and the scope of these rules.

Talking with the client

Many of the questions in this process need an answer from the client, not from the invoice. When you raise one, keep the note specific. Name the invoice, describe the part, and ask a question that can be answered quickly. For example, ask whether the part is used to improve a piece of equipment, or whether it goes into something the client sells. Clients can usually answer a question framed around how an item is used. A vague question such as "is this a capital expense?" tends to produce a vague answer.

Keep the answers in the client file alongside the card. If the case changes later, because the part is used differently or the client starts selling a product that uses it, the note shows what was decided and why, and the record can be updated with that history in view.

Closing thoughts

Supply costs look minor on an invoice, which is why they are easy to put in the wrong place. The discipline that helps most is simple: decide the case first, then build the record. The IRS wording gives you two specific tests, one for supplies used to improve property and one for supplies built into property the client produces or acquires for resale, along with an exclusion for certain spare parts. The Business Central and Manager steps show you where the decision lands in the software. Neither system will make the judgment for you, so the review step before saving is where the work of getting it right actually happens.

Sources