Why ACH fees need checking before the client pays
The ACH processing fee on Square Invoices is 1% with a $1 minimum, though a plan cap or a Square Checking account can change it. When a small-firm client receives an invoice, the payment options on the page can matter as much as the amount due. Some clients want to pay straight from their bank account, and that option can look like the cheapest path for everyone involved. Whether it is cheaper depends on the fee rules of the invoicing tool your firm uses, and those rules are not always obvious from the outside.
This matters most to two groups. Partners set the payment policy, decide which methods the firm offers, and answer for the choices made in the client relationship. Operations leads write the billing notes, answer the questions that come in after an invoice goes out, and reconcile the payments when they land. Both groups need the same facts, and both are likely to be asked what a bank payment will cost the client and the firm.
This post covers four facts about ACH fees, using Square's published help article as the reference. ACH is the bank-to-bank transfer network that moves money directly between two accounts. When a client pays an invoice this way, the invoicing platform may charge a processing fee. Providers set those fees on their own terms, and the terms can differ by plan, by the type of account the seller holds, and over time.
Treat what follows as a checklist of questions, not as a price list to paste into a proposal. The four fact sections link to the help page they rely on, so you can confirm the current wording before you quote a client. Pages get revised, and a figure you saw in a meeting last quarter may no longer match the page your client reads today.
Taken together, the four facts show why a single rule of thumb is risky. "Bank payments are free" is wrong for some sellers and some accounts, and "bank payments cost a flat fee" misses the percentage, the minimum, and the cap. The sections below take each fact in turn, work through the arithmetic, point out common mistakes, and end with steps your team can take before a client pays.
The percentage has a floor
On Square, the ACH processing fee for Square Invoices is 1% with a minimum fee of $1 and no additional processing costs, according to Square's help article on creating and sending invoices.
That sentence has three parts, and each one matters. The first is the percentage. The fee grows with the invoice amount, so a larger bill produces a larger fee. The second is the floor. Because the minimum is $1, a very small invoice does not produce a fee of a few cents. When 1% of the amount falls below $1, the minimum applies and the fee is $1.
The floor matters most to firms that send small, frequent bills. Consider a bookkeeping practice that bills a modest monthly retainer, or a consulting partner who sends short invoices for individual tasks. For bills like these, the fee may be set by the minimum rather than the percentage. Across a year of small payments, the minimum can be a larger share of the invoice than the team expects. A firm that quotes only the percentage will look cheaper on paper than the bill it actually produces.
The phrase "no additional processing costs" is the third piece. Read literally, the 1% with a $1 minimum is the processing fee for that ACH payment, with no extra charges added to each payment. That reading is worth confirming against the live page, because it is the wording your team will rely on when a client asks what the fee is.
Many teams stop at "1%" when they describe the fee. That shorthand is useful, but it leaves out the floor. A partner who tells a client "it's one percent" has given an accurate rate and a misleading picture of small payments. Operations leads should record both halves of the rule in the billing notes, so that whoever answers the next question has the full picture.
Before a client pays by bank, check three things:
- Whether the client's typical invoice is large enough that the percentage, rather than the minimum, drives the fee.
- Whether your internal billing notes mention the minimum as well as the rate.
- Whether anyone on your team has quoted the fee as a flat amount, which would be wrong for invoices of different sizes.
A $300 invoice shows the math
Square's help page gives a worked example that is easy to remember: "For example, if your invoice is for $300, the processing fee will be 1% or $3.00," as stated in Square's invoice help article.
A worked example is worth more than a rate for a team that has to explain fees to clients. A client who hears "1%" may not picture what that means in dollars. A client who hears "$3.00 on a $300 invoice" can check the number against the bill in front of them. That check builds trust and shortens the back-and-forth that follows a surprise charge. Building your own examples around the amounts your clients actually invoice is one of the most practical habits a billing team can adopt.
Check the rule against your own invoices. Pull a handful of recent bills, from your smallest to your largest, and apply 1% with the $1 minimum to each. Write down the fee for every one. Then compare those figures with what your team has been telling clients. These are calculations from the stated rule, not quotes from Square for any particular account, so a difference usually means the notes need correcting rather than the arithmetic.
Two things tend to stand out. The minimum matters only at the low end of the range, because once 1% of an invoice exceeds $1, the percentage is the number that counts. The fee also rises in a straight line as the invoice grows, so the percentage drives the cost of large bills. Teams that send many small invoices should watch the minimum. Teams that send large ones should watch the percentage, and the cap covered in the next section.
Whatever figure you settle on, decide in advance how it will be presented. A short sentence on the invoice, stating the rate and the minimum, avoids most confusion. A longer explanation belongs in the billing notes, where the operations team can point to it.
The cap applies on a higher plan
Square's help page says you can upgrade to Invoices Plus for a $10 fee cap on each ACH transaction, according to Square's invoice help article. That sentence changes the arithmetic for large invoices, but only for firms that use the plan.
Here is how the cap works. Without it, the 1% fee keeps rising with the invoice. With it, no single ACH transaction carries a fee above $10, however large the invoice is. The cap applies to each ACH transaction, not to a firm's total for the year. A firm with several large invoices paid by bank could pay up to $10 on each one, not $10 in total.
Using the 1% rate, the cap starts to matter at the point where 1% of an invoice equals $10. Above that point, the cap saves money on each transaction. Below it, the cap changes nothing, because the percentage is already under the limit. That threshold is the most useful number for deciding whether the upgrade is worth considering.
Two firms show the difference. The first sends mostly modest invoices, with an occasional larger bill. For that firm, the cap would seldom change a fee. The second sends a steady flow of large project invoices, where a single client payment may be a large sum. For that firm, the cap could change the fee on many ACH payments. The same plan can suit one firm and not another. The only way to know which describes your firm is to look at your own invoice history.
Whatever it costs has to be weighed against the savings the cap produces on your large ACH payments over the period you care about. Find the current plan price on Square's pages, then compare it with the fees you would have paid without the cap. A decision that rests on the cap alone is incomplete.
Questions to ask before anyone changes plans:
- Do we send many invoices large enough that 1% of the amount exceeds $10, to clients who pay by bank?
- What does the upgrade cost, and over what period would the savings need to cover it?
- Who would manage the plan change, and how would we confirm when it takes effect?
- Do any clients rely on the bank option for their largest payments, and would the cap change what they pay?
A Square Checking account can make the fee $0
Square's help page says that "ACH transactions for sellers with a Square Checking account will pay $0 in processing fees for those transactions," as stated in Square's invoice help article.
The important word is "seller." The rule is about the seller's account, not the client's bank. What matters for the processing fee is whether the seller holds a Square Checking account. Two firms with the same clients, the same kinds of invoices, and the same invoicing tool can face very different ACH costs, depending on whether each one holds that account.
This is why a fee comparison should start with the account, not only the invoice. Before a firm can say what a bank payment will cost, it needs to know which account the payment ties to and whether that account meets the quoted condition. A team that assumes every bank payment is free, or that every bank payment carries the 1% rule, has skipped the first question.
The rule also has limits. It covers ACH transactions and nothing else, so the $0 figure should not be extended to card payments or other methods. When you compare a bank payment with a card payment, use the fee each method carries under its own rules, and check those rules on each method's pages. Mixing the two produces a comparison that looks neat and is wrong.
Opening a Square Checking account, what it requires, and whether it carries other costs are details for Square's account pages. Confirm eligibility and terms before you tell a client or partner that the ACH fee is zero for your firm. A zero fee that turns out not to apply costs credibility, and it can distort a pricing decision built on it.
Questions to ask:
- Does our firm's seller account meet the condition in Square's help article for the $0 treatment?
- If we changed accounts, what would change in our payment records and in invoices already sent?
- If we tell clients about the $0 treatment, how do we describe it so that it is accurate and limited to ACH?
Common mistakes to avoid
Several errors show up again and again when teams first look at ACH fees. The first is quoting the rate without the minimum. A client who hears "1%" and then sees a $1 fee on a very small invoice will feel misled, even if the rate was correct.
The second is assuming the cap applies to everything. The $10 cap applies to ACH transactions for firms on the upgraded plan, and it applies to each transaction. A team that tells clients "the fee never exceeds $10" without mentioning the plan has overstated the rule. The third is the reverse: assuming the cap is available without an upgrade. Under this rule, it is an upgrade option, so a firm on the standard setup should not promise it.
The fourth mistake is treating the $0 fee as universal. It applies to ACH transactions for sellers with a Square Checking account. Teams that apply it across the firm, without checking the account, set client expectations that cannot be met.
The fifth is the quietest. Teams often do not record the processing fee next to each payment, so the books show the full invoice amount without showing what the firm actually kept. When a client asks why a payment was short, or a partner asks what the bank option really cost, nobody can answer quickly. Storing the fee with each invoice prevents that problem.
What to do before a client pays by bank
The steps below can be done in an afternoon. They turn the four facts into a routine that a billing team can follow whenever a client asks about the bank option.
-
Confirm the account and the plan. Write down which Square account and invoicing plan your firm uses. The cap and the $0 treatment both depend on them, and a comparison built on the wrong assumption will be wrong from the start.
-
Test the numbers on real invoices. Apply the 1% rate and the $1 minimum to a sample of recent invoices, and record each fee. Correct the billing notes wherever they differ from the results. For a wider set of checks before sending, see Invoice checks: 4 steps before sending a client bill.
-
Decide who bears the fee. Make this choice on purpose. Your firm can absorb the processing fee or pass it to the client. If you pass it on, make sure the client sees the amount before paying, and check your engagement terms and any rules that apply where you work before adding a surcharge. A fee that appears for the first time at checkout invites complaints.
-
Write one short script for billing staff. State the rate, the minimum, and the account condition, with a link to the source page. Make no claim about card fees, and do not promise the cap unless the firm is on the plan that offers it.
-
Set a review date. Fee pages change. Assign one named person to check the source pages on a fixed schedule, and update the script and notes when they do. A quarterly check is a reasonable starting point for most small firms, and the owner should note the date of each check.
-
Keep the records straight. Store the processing fee for each ACH payment with its invoice. That lets the team reconcile payments at month end and explain any difference if a client asks. For the matching step, see Client bank reconciliation with 4 balance checks. It also gives partners the evidence they need when they review whether the bank option serves the firm well.
-
Agree on the first answer. Clients often ask what a bank payment costs them before they choose it. Agree on a one-paragraph answer that covers the rate, the minimum, and the plan or account condition, so that every team member gives the same response.
The short version
The four facts are short, but they change the answer to a simple question.
Put together, these facts mean that the cost of a bank payment is not one number. It depends on the size of the invoice, the plan the firm uses, and the account the seller holds. Before a client pays by bank, work out which of those applies to your firm, check the current pages, and say so plainly. A client who understands the fee before paying is far less likely to be surprised by it afterward, and that is the outcome both partners and operations leads should pursue.
Related guides: Bank reconciliation: 8 checks before client sign-off · Check 5 mileage-log details before a client's return.