Skip ahead to the main page
Partner Huddle
Pages

4 W-2 entries to check before client sign-off

Partner Huddle Editorial Team · Published · 11 min read

Four W-2 entries to check before partner sign-off are Box 10, code TA, Box 14, and Boxes 15 through 20.

Key Takeaways

  • Check Box 10 (dependent care benefits) against the plan administrator's year-end statement, not last year's return.
  • Treat code TA as an open item until the employer's documentation for a section 128 contribution is in the file.
  • Ask about third-party sick pay at intake, so a Box 14 question does not surface the week before sign-off.
  • Compare every state in Boxes 15 through 20 to where the employee actually worked and lived this year.

Why these four entries get missed

Most W-2 problems in a small firm are not math problems. A payroll export fills in the wage and withholding boxes, the preparer carries them into the return, and the totals tie out. The trouble tends to sit in fields nobody checks twice: a coded entry, a benefit box that only some clients use, or a state box that was copied forward from last year. A totals check does not test these entries.

Partners reviewing a return naturally focus on income, the refund or balance due, and whether the client's year makes sense. An operations lead working through a stack of W-2s during the busiest weeks is usually confirming that each form has a name, an identification number, and an employer that matches the file. Neither review asks whether an optional or coded entry is right. This post covers four entries that deserve that second look.

The list is drawn from the IRS instructions for Forms W-2 and W-3 (2026), which define what each entry means and, in some cases, which form variants it does not apply to. When a question comes up about what an entry should contain, go to the instructions first. This post explains how to check entries against your client's records. It does not replace the instructions.

Set up the review before the stack arrives

A review that starts on the day the W-2s arrive is already behind. Build the checklist in the slower months, test it on last year's returns, and keep it short enough that people will actually use it. The Accounting Client Intake Checklist for a Clear Handoff gives you a starting structure.

A workable checklist asks a few plain questions for each file:

  • Where did the W-2 come from: payroll software, a payroll provider, or a hand-entered form? Re-keyed data is where transcription errors tend to cluster.
  • Does each entry you are reviewing have support in the client's payroll records or a plan statement?
  • Has the employer's name, address, or identification number changed since last year? If so, is there a note explaining why?
  • Does any box on the W-2 map to a field your return software does not fill automatically? Those are the boxes a preparer is most likely to overlook.

Divide the work clearly. The operations lead runs the checklist and marks each item as checked, not applicable, or open. The partner signs off only after every open item has an answer. A file with an open question should not move forward just because the totals balance. Balanced totals are what the return's arithmetic confirms; they are not evidence that each individual entry is right.

Keep a short note for each exception: what you saw, who you asked, the answer, and when it came back. If a client changes payroll providers mid-year, or a partner overrides a figure after a conversation with the client, that note is what shows the firm why the file looks the way it does.

The four entries at a glance

The table compares the four entries on the two points the IRS instructions state for each one: what the entry covers and which form variants it does not apply to. Where the excerpt says nothing about exclusions, the table says "Not stated" rather than guessing.

EntryWhat the IRS instructions say it covers Form variants the instructions say it does not apply to
Box 10Dependent care benefitsW-2AS, W-2CM, W-2GU, and W-2VI
Code TAEmployer contributions under a section 128 Trump account contribution program, paid to a Trump account of an employee or a dependent of an employeeNot stated
Box 14Income tax withheld by payer of third-party sick payNot stated
Boxes 15 through 20State and local income tax information W-2AS, W-2CM, W-2GU, and W-2VI

Entry 1: Dependent care benefits (Box 10)

The IRS instructions describe Box 10 as dependent care benefits. The same instructions say the entry does not apply to Forms W-2AS, W-2CM, W-2GU, and W-2VI, which are the forms used for the U.S. territories. For the standard Form W-2 your clients receive, the box is one to reconcile against records, not one to read past. The IRS instructions for Forms W-2 and W-3 (2026) are the place to confirm the box's definition.

Dependent care benefits are easy to miss because they can come through an employer-administered arrangement rather than ordinary wages. A reviewer who only ties out the wage total will not see whether this box is complete. The question for each file is whether the amount in the box is backed by a document the firm can produce.

Check the following:

  • Ask each client whether the employer offered a dependent care benefit that year. If it did not, there is nothing to enter, and the question closes.
  • If there was a benefit, get the year-end statement from the plan administrator and compare it to the amount on the W-2. The payroll register alone may not show the benefit at all, so it is not enough.
  • If the client changed payroll providers during the year, ask for year-end totals from both providers and confirm they add up to the amount on the form.
  • Look at last year's file. A figure carried forward without a new statement behind it is worth questioning, even if it looks familiar.

If the only source for the amount is last year's return, the entry is still open. Mark it that way and keep it open until the current-year document arrives.

Entry 2: Code TA and Trump account contributions

The IRS instructions define code TA as employer contributions under a section 128 Trump account contribution program that are paid to a Trump account of an employee or a dependent of an employee. The definition is specific on two points. The contribution must be made under a section 128 program, and the account can belong to the employee or to a dependent of the employee. Anything outside those two points is a question for the client, not a guess for the preparer. The IRS instructions give the full wording.

Because this code is tied to a specific program, it is easy to skip if no one on the team has seen it before. Skipping it is the mistake to avoid. An empty code TA is the right answer only if the employer made no such contribution in the year. Treat the absence of the entry as a fact to confirm, not as a default.

Check the following:

  • Ask the client whether the employer made any contribution under a section 128 program during the year. Do not infer the answer from wage data or from a general benefits summary, since neither may cover it.
  • Confirm the recipient. The definition covers an employee's account and a dependent's account. A contribution made for someone outside that definition needs a question before it goes on any form.
  • Tie the amount to the employer's records. A figure from a phone call is a note, not support, and it is not enough for sign-off.
  • Check that the amount sits under this code and not under another entry. A figure in the wrong place can still pass a totals check, which is exactly why the totals check is not sufficient here.

Treat code TA as an open item until the employer's documentation is in the file. A partner who signs before that point is relying on a conversation the firm cannot show later.

Entry 3: Income tax withheld on third-party sick pay (Box 14)

Box 14 is described in the IRS instructions as income tax withheld by a payer of third-party sick pay. The entry is about withholding, so the first question for the file is whether any sick pay reached the employee from a payer other than the employer. The IRS instructions for Forms W-2 and W-3 (2026) describe the entry in the same terms.

Third-party sick pay is easy to overlook because the employer may not have been the one who paid it. The client may remember a leave of absence and nothing else. The paperwork for a third-party payment can sit with an insurer or an administrator rather than in the employer's payroll system, so a review limited to payroll reports can miss it entirely.

Check the following:

  • Ask whether the employee had any leave during the year and whether a third party paid sick benefits during it. A yes answer is the trigger for the rest of this review.
  • If the W-2 shows an amount in this box, ask who the payer was and request that payer's statement. The withheld figure should tie to it.
  • If the W-2 shows nothing in this box but the client describes third-party sick pay, stop and ask the employer's payroll contact why nothing was reported. Do not let the preparer fill the box from a guess.
  • Make sure the preparer knows the amount came from a third party, so the return's treatment can be checked against the payer's records rather than against the payroll register.

Sick-pay questions can surface late, after a client has already described the year as routine. Build the question into intake, not into the week before sign-off, and ask it directly rather than asking whether anything unusual happened. The Payroll intake review against 4 source guides shows how to structure that intake step.

Entry 4: State and local tax information (Boxes 15 through 20)

The IRS instructions describe Boxes 15 through 20 as state and local income tax information. The same instructions say these boxes do not apply to Forms W-2AS, W-2CM, W-2GU, or W-2VI. Of the four entries in this post, this group carries the most cross-checking, because these boxes connect the federal W-2 to the state returns that depend on it. The IRS instructions are the reference for what the boxes are.

Trouble usually shows up in situations that raise a simple question. A client who lived in one state and worked in another during the year, or who moved partway through, can have state information that does not line up with the state where the return is filed. Multi-state payroll, remote work, and mid-year moves are common reasons the state boxes stop matching the return. The review should look for those reasons, not just for a box that is blank.

Check the following:

  • List every state that appears on the W-2s and every state that appears on the return. A mismatch in either direction needs a question before sign-off.
  • Compare the state withholding figures to the employer's state filings or payroll summary, not only to the copy of the W-2 in the file.
  • For employees who moved or changed work location, compare the year's addresses to the state entries. The question is whether the state information matches where the employee actually worked and lived.
  • Confirm the employer's state-level identification details match what the state filings show.
  • Do not copy the prior year's state entries forward without confirming each one against current-year records.

State entries are also where a preparer's software can make a silent choice. Ask the preparer which state boxes the software fills automatically and which ones were entered by hand, and review the hand-entered ones first.

Territory forms and one more item

Two notes come from the same IRS instructions and affect the checklist.

First, the instructions say that the territory forms, W-2AS, W-2CM, W-2GU, and W-2VI, should be checked with the respective territory for applicability. The instructions also mark Box 10 and Boxes 15 through 20 as not applicable to those forms. If your firm files for clients in a territory, put that check on the checklist rather than assuming the standard form rules apply.

Second, the instructions list an earned income tax credit (EITC) notice item. It is not one of the four entries covered in this post, and the instructions also mark it as not applicable to the territory forms. If your firm handles clients who receive that notice, add a line for it to the checklist so it gets the same written treatment as the entries above.

Worked example: one file, four open items

An operations lead receives two W-2s for a client who changed payroll providers mid-year. Box 10 shows a figure, but no plan administrator statement is in the file, so she marks it open and requests the statement. Code TA is blank, so she asks the client directly whether the employer made a section 128 contribution that year. Box 14 shows an amount, and she requests the payer's statement to tie it to. Boxes 15 through 20 list two states, while the return shows one; she asks the preparer which state boxes the software filled by hand. All four items go on the one-page summary to the partner, each with an owner and a due date.

From checklist to sign-off

A good sign-off packet is short. For each client, the operations lead should send the partner one page: the four entries checked, the open items with the name of the person who owns each one, and a plain line stating whether the file is ready. Partners then spend their time on judgment calls rather than hunting through the file for a missing statement.

Keep the checklist itself under review. After each season, go through the notes from the exceptions.

The four entries in this post are not the only W-2 entries that matter. Start there, use the IRS instructions as the reference, and do not let a balanced total close a question that is still open.

General information, not legal or tax advice.

Sources