A tenant deposit return statement must show the deposit amount, the termination or vacation date, each withholding with its reason, the balance due, and the delivery method with the address used. In Wisconsin, Nebraska, and Maryland, these are the five fields to fill; what changes is how the date is computed, the deadline, and the delivery rule.
- Deposit amount received — pull the total from the lease or payment slip and reconcile it to the bank or accounting-system entry.
- Termination or vacation date — set it from the state rule (Wisconsin splits on vacate timing and rerents; Nebraska runs from termination of the tenancy) and back it with a document in the file.
- Itemized withholdings — one line for each withholding, each naming the work and the cost, with invoices attached where available.
- Balance due the tenant — deposit minus withholdings, entered even when it is zero, and tied to the payment you will send.
- Delivery method and address used — record how it went out, where, and the date sent; log any returned mail.
What a deposit return statement must show
A deposit return statement must show what the tenant paid, what the landlord withheld, why, and where the balance went. These are the five fields you fill in on every statement you prepare for a landlord client: the deposit amount, the termination or vacation date, each withholding with its reason, the balance due, and the delivery method with the address used. Wisconsin's rule makes the scope explicit: if any part of the security deposit is withheld, the landlord must deliver or mail a written statement accounting for all amounts withheld, under ATCP 134.06.
The accounting must cover all amounts withheld, not only some of them. The statement is the document a tenant reads to understand the outcome, and it is the document your firm hands back to the landlord if the tenant disputes it. Getting the five fields right on the first pass keeps the statement defensible and keeps your client out of a back-and-forth over a missing line.
Who this guide is for
This guide is for operations leads at small accounting firms who prepare deposit return statements as part of a landlord client engagement. You are not a property manager and not a lawyer. You are the person who takes the lease, the move-out notes, the invoices, and the bank record, and turns them into a statement the landlord can send.
You probably handle several landlord clients at once, each with a different lease form and a different habit of documenting damage. The work is repetitive but exacting. A missing date or an unexplained deduction is what triggers a tenant inquiry, and the inquiry lands back on your desk.
If your firm only touches deposits occasionally, the field structure below still applies. The rules differ by state, so the discipline is the same everywhere: name the five fields, fill them from source documents, and check the delivery deadline before the statement leaves the office.
How the termination date is determined
The termination date field is the date the statement's deadline runs from, so it must be set before anything else. Wisconsin's rule splits the question in two. If the tenant vacates or is evicted before the rental agreement's termination date, the relevant date is when the agreement terminates, or, if the landlord rerents first, when the new tenancy begins. If the tenant vacates or is evicted after that date, the relevant date is when the landlord learns the tenant has vacated or been removed. Both branches appear in Wisconsin's ATCP 134.06.
Nebraska's statute anchors its deadline differently. Its fourteen-day clock runs from the date of termination of the tenancy, as set out in Nebraska's statute 76-1416. The lesson for your firm is that the date field is state-specific in how it is calculated, and you should set it from the state rule that governs that client's property, not from a standard house form.
The date you enter must match a document in the file. A lease termination letter, a move-out confirmation, a rerent agreement, or a written notice from the landlord that the unit is empty all work. If the file contains two possible dates, resolve it before drafting. The statement's deadline, and every other field's context, hang off this one entry.
Here is how the three state rules in our sources anchor their clocks:
| State | Clock starts from | Source |
|---|---|---|
| Wisconsin | Lease termination date, new tenancy start if rerented early, or landlord's learning date if later | ATCP 134.07 |
| Nebraska | Date of termination of the tenancy | Statute 76-1416 |
| Maryland | 45 days from eviction, ejection, or abandonment, for the tenant's written demand by first-class mail | Maryland statute 8-203 |
The five fields, one by one
Field 1: Deposit amount received. This is the total the tenant paid, as recorded at the time of payment. Pull it from the lease or the payment slip, not from memory. The figure should reconcile to the bank or accounting-system entry for that unit. If the tenant paid in installments, enter the total, and keep the payment record in the file. The statement's balance math starts here, so an error in this field propagates to every other line.
Field 2: Termination or vacation date. As set out above, compute this from the state rule. Enter the date in full. The date anchors the delivery deadline and tells the tenant when the clock started. Keep the supporting document in the file. If the landlord rerented before the original lease end, record the new tenancy's start date instead, since Wisconsin's rule points to that date in that case.
Field 3: Itemized withholdings. Each withholding gets its own line with a plain reason. Cleaning, repairs, unpaid rent, and replaced keys are typical categories, but the statement should describe what was actually done and what it cost, in words a tenant can follow. Wisconsin requires a written statement accounting for all amounts withheld. Nebraska's statute calls for a written itemization of the amount not returned. The itemization field is where vague language costs you: "damages" is not an itemization. A line that reads "kitchen cabinet repair, invoice attached" is.
Field 4: Balance due the tenant. Subtract the withholdings from the deposit received. Enter the resulting figure, even when it is zero. A zero balance still needs the statement, because the tenant is entitled to the accounting. The balance field is also the amount you will physically send or transfer, so it should tie to the payment record once the disbursement is made.
Field 5: Delivery method and address used. Record how the statement and balance went out and where. Wisconsin's rule treats delivery by an agent of the landlord, such as a private courier service, as delivery. Nebraska's statute addresses the case where the tenant gave no mailing address or instructions: the landlord mails by first-class mail to the tenant's last-known mailing address. Capture the method, the address, and the date sent. If the mailing comes back undeliverable, or the returned balance stays outstanding for a year, Nebraska's statute treats it as abandoned property to be reported and paid to the State Treasurer under the Uniform Disposition of Unclaimed Property Act.
Deadlines you are working against
The deadline is a property of the state rule, and it starts from the date you entered in field 2. Nebraska's rule gives fourteen days after the termination of the tenancy to deliver or mail the balance and the written itemization. Wisconsin's rule requires the written statement within the time period specified in its sub.(2), which is where the date calculation you did earlier feeds in. Maryland's statute gives the tenant 45 days from eviction, ejection, or abandonment to demand return of the deposit by written notice sent by first-class mail.
Notice that Maryland's 45 days is a tenant-side clock, not a landlord deadline. The window sets a limit on when your client may receive a tenant demand under Maryland's rule. Build the statement as soon as the move-out package is complete, rather than waiting for a tenant prompt.
Work backward from the deadline when you schedule the job. The date in field 2 tells you the outside date. The itemization needs invoice support, which sometimes takes longer than the drafting. Flag the case to the landlord client early if an invoice is outstanding, so the statement does not miss the window over a pending repair bill.
Putting a statement together
Start a case folder the week of move-out. Put the lease, the move-out correspondence, the key return slip, and any cleaning or repair invoices in it. Confirm the deposit amount from the payment record. Set the termination date from the state rule. Then draft the five fields in order.
Draft the itemization from documents, not from a walkthrough memory. Each line should name the work and the cost. If the landlord did the work themselves, ask for how they calculated it. Attach invoices where the client has them. Your statement is stronger when each withholding line points at a paper support.
Tie the balance to the deposit minus withholdings before you send anything. Then record the method and address for delivery and the date sent. Keep the whole package in the folder: the statement as sent, the proof of delivery, and the payment record for the balance. That folder is what you produce if the tenant writes back.
If the landlord client uses a standard form, map the form's fields to the five above and fill any gaps. If that form has no line for the delivery address, add one. If it lumps all withholdings under one heading, split them. Your firm's value here is the structure, not the prose.
When the tenant disputes a line
A tenant dispute usually lands on a single itemization line rather than the whole statement. Pull the supporting invoice or calculation and respond with that document, restating the line as written. Keep the response factual: what was done, what it cost, and where the charge appears on the statement.
If the dispute concerns the termination date itself, the state rule you applied decides it. Show the document that set the date: the lease end, the rerent, or the landlord's written notice of vacancy. The rest of the statement follows from that date, so resolving this field first keeps the conversation short.
When the mail comes back
If the mailing is returned undeliverable, or a returned balance stays outstanding for a year, Nebraska's statute treats it as abandoned property to be reported and paid to the State Treasurer under the Uniform Disposition of Unclaimed Property Act. Record the returned mail in the case folder and tell your landlord client the same day, because the reporting obligation sits with them.
Try the last-known address on file first, as Nebraska's rule directs when the tenant provided no mailing address or instructions. Keep a note of what you tried and when. That record supports the client if the handling is questioned later.
What varies by state
Across Wisconsin, Nebraska, and Maryland, the five fields stay the same. What changes is how the termination date is computed, how fast the statement must go out, how the delivery must happen, and what happens to a balance that cannot reach the tenant. Wisconsin's rule is specific about rerents and about the landlord's learning date, and it treats courier delivery by an agent as delivery. Nebraska's rule fixes a fourteen-day window from termination and addresses the no-address case and the abandoned-property outcome. Maryland's statute gives the tenant a 45-day demand window by first-class mail.
Do not carry one state's logic into another client's file. The field labels can be house standard. The date rule, the deadline, and the delivery rule come from the state that governs that property. If your firm picks up a client in a new state, read that state's security deposit statute before the first statement goes out.
If a source leaves a question open, ask the landlord client's attorney, since the statement's sufficiency under that state's rule is a legal call your firm should not make alone.
A completed statement, walked through
A tenant moves out three weeks before the lease ends, so the Wisconsin-style branch applies: the rental agreement's original termination date governs unless the landlord rerents first, and if a rerent happens before that date, the new tenancy's start date governs instead. Enter whichever applies, from the document in the file.
The deposit received field carries the figure from the payment record. The itemization has three lines: a cleaning charge with the cleaner's invoice attached, a drywall repair with the contractor's invoice, and an unpaid final week of rent tied to the lease's rent schedule. Each line names the work and the cost. The balance field is the deposit minus those three lines, entered in full even if the result were zero.
The statement and balance go out by the method the state's rule allows, to the address on file, and the date sent is recorded in the folder. If the mail comes back and Nebraska's rule applies, report and pay the balance to the State Treasurer under the Uniform Disposition of Unclaimed Property Act. Everything in the folder now supports every field on the page, which is the whole point of the exercise.
Final checklist before you send
Run this list on every statement:
- Deposit amount ties to the payment record for that unit.
- Termination or vacation date is computed from the governing state rule and backed by a document in the file.
- Itemized withholdings each name the work and the cost, with invoices attached where the client has them.
- Balance due equals deposit minus withholdings, and ties to the payment you will send.
- Delivery method and address are recorded, with the date sent, and any returned mail is logged.
Send the statement inside the state's window, calculated from the date in field 2. Keep the sent copy, the delivery proof, and the payment record together. That set of five fields, filled from documents and delivered on time, is the job.
Related guides: ACH and card rent deposit windows on 3 platforms · Charity gift over $75: 3 checks for a written statement · Check 5 mileage-log details before a client's return.